• PCS PulseWorx UPB Relay Fixture Module, 20A (FMR1-20)

    The FMR-1 Fixture Module Relay is a single-channel wire-in home automation non-dimming relay load controller that transmits and receives UPB commands and status over the existing powerlines. It's the ideal solution for fluorescent lights, or other non-dimming loads (such as motors or transformers), that need to be individually controlled but are not currently wired to a dedicated wall switch location. Simply mount the FMR1 in any standard electrical box by snapping it into a 1/2-inch knockout. The module can either mount outside of the box or reside in the box. Use standard wire-nuts to connect the FMR1 to line and neutral and the loads. The high 20A rating of the Fixture Module Relay can control any conventional 20A residential circuit. The FMR1 will accept powerline commands from any UPB-compatible transmitter such as the PulseWorx Keypad Controllers, Timed Event Controller, Interface Modules, Approved Third-Party Controllers, Touch Screens, and WS1s. It can be a member of up to 16 Links/scenes with the capability to store a preset relay state of 0 or 100 percent. Each preset state can easily be adjusted by the homeowner using the innovative PulseWorx manual programming method. Each Fixture Module can be configured to transmit status changes and inform the rest of the network w...

    • Brand: Powerline Control Systems (PCS)
    • ASIN: B0078898WI
    • UPC: 811976011637

  • PCS PulseWorx UPB Wall Switch Relay, 10A, Lite Almond (WS1R-10-LA)

    Replace a traditional light switch with a UPB controlled light switch! The PCS PulseWorx Wall Switch Relay (15A) replaces an existing switch to deliver both remote and local control over the connected load. Use up to eight PulseWorx UPB transmitters of any type to remotely turn the load On/Off, or just hit the switch! The Wall Switch Relay features a low-profile, decorator design to attractively blend in with your home's decor. It mounts in a single- or multi-gang box and supports three-way control when used in conjunction with a second UPB switch (sold separately). FEATURES: Replaces an existing light switch. Provides both local and UPB remote control. Great for lights, motors, ceiling fans, pumps, etc. Adjustable LED brightness and backlighting. Mounts in a single or multi-gang box. NOTE: Requires a PulseWorx UPB transmitter for remote operation. COLOR: Light Almond.

    • Brand: Powerline Control Systems (PCS)
    • ASIN: B00D81LX8Q
    • UPC: 811976013600

  • Leviton 40A00-1 HLC Relay Switch, 15 Amps

    The 15A Relay UPB Switch is used for controlling heavier loads (up to 15 Amps) or motors, such as ceiling fans, that may hum when used with Dimming or Non-Dimming switches. It comes with a default white paddle, connectors, and instructions. 15A relay switches require a neutral (white) connection wire.

    • Brand: Leviton
    • ASIN: B000P0UCJO
    • UPC: 872257002256

  • PCS PulseWorx UPB Wall Switch Relay, 10A, White (WS1R-10-W)

    Replace a traditional light switch with a UPB controlled light switch! The PCS PulseWorx Wall Switch Relay (15A) replaces an existing switch to deliver both remote and local control over the connected load. Use up to eight PulseWorx UPB transmitters of any type to remotely turn the load On/Off, or just hit the switch! The Wall Switch Relay features a low-profile, decorator design to attractively blend in with your home's decor. It mounts in a single- or multi-gang box and supports three-way control when used in conjunction with a second UPB switch (sold separately). FEATURES: Replaces an existing light switch. Provides both local and UPB remote control. Great for lights, motors, ceiling fans, pumps, etc. Adjustable LED brightness and backlighting. Mounts in a single or multi-gang box. NOTE: Requires a PulseWorx UPB transmitter for remote operation. COLOR: White.

    • Brand: Powerline Control Systems (PCS)
    • ASIN: B00CM8AU8K
    • UPC: 811976013617

  • PCS PulseWorx UPB Keypad Controller with Load Relay, White (KPLC-7-W)

    The PulseWorx UPB Wall Controller with Load Relay combines the functionality of PulseWorx's popular KPC Keypad Controllers with their newly patented Relay Dimming technology. This new technology allows the keypad to communicate with LED lighting fixtures when paired with a PCS UPB Receiving Module (sold separately). The controller can issue On, Off, and Dim commands to connected 0-10V LED fixtures and create scenes, once the controller is included into a UPB network. Out of the box, the Wall Controller only controls LED fixtures attached to the RM-0-10V Receiving Module. The Controller can be reconfigured to transmit and receive UPB commands with the UPstart configuration program. Once the Wall Controller with Load Relay is configured to work with other PulseWorx devices, it can be included into UPB networks and programmed to command scenes. Each of the seven buttons on the keypad can be programmed to provide direct load control, remote control over other single UPB-enabled devices, or UPB scene control. The keypad itself can also be a member of up to 16 different scenes. The keypad mounts into a standard single-gang box, so it can easily replace an existing switch. Buttons are backlit to provide easy viewing at night, and the brightness is adjustable. Note: Neutral wire required...

    • Brand: Powerline Control Systems (PCS)
    • ASIN: B07BKB62PJ
    • UPC: 811976014362

  • Leviton Security and Automation LV35A14-LV35A14BL Color Change Kit for UPB Switch, Black

    Leviton gives you limitless options for both security and aesthetic lighting in the home. The default color for all UPB Switches is White. Use these Switch Color Change Kits to change the color of your switches.. Color - Black.Compatible with the following Switches. UPB Dimmer Switch 600W 35A00-1 or 35A00-1CFL.. UPB Non-Dimming Switch 600W 35A00-3.. UPB Auxiliary Switch 37A00-1.. UPB Relay Switch 15A 40A00-1.

    • Brand: Leviton
    • ASIN: B00HHDVNOA

  • PCS PulseWorx UPB Keypad Controller with Load Relay, Light Almond (KPLC-7-LA)

    The PulseWorx UPB Wall Controller with Load Relay combines the functionality of PulseWorx's popular KPC Keypad Controllers with their newly patented Relay Dimming technology. This new technology allows the keypad to communicate with LED lighting fixtures when paired with a PCS UPB Receiving Module (sold separately). The controller can issue On, Off, and Dim commands to connected 0-10V LED fixtures and create scenes, once the controller is included into a UPB network. Out of the box, the Wall Controller only controls LED fixtures attached to the RM-0-10V Receiving Module. The Controller can be reconfigured to transmit and receive UPB commands with the UPstart configuration program. Once the Wall Controller with Load Relay is configured to work with other PulseWorx devices, it can be included into UPB networks and programmed to command scenes. Each of the seven buttons on the keypad can be programmed to provide direct load control, remote control over other single UPB-enabled devices, or UPB scene control. The keypad itself can also be a member of up to 16 different scenes. The keypad mounts into a standard single-gang box, so it can easily replace an existing switch. Buttons are backlit to provide easy viewing at night, and the brightness is adjustable. Note: Neutral wire required...

    • Brand: Powerline Control Systems (PCS)
    • ASIN: B07BKB9ZDB
    • UPC: 811976014379

  • PCS PulseWorx UPB Wall Switch-Relay/Dimmer, Gray (WS1C-G)

    Replace a standard light switch with a UPB controlled dimmer switch! The PCS PulseWorx Wall Switch Relay/Dimmer (15A) replaces an existing switch to deliver both remote and local On/Off/Dim control for connected LED loads. The Relay/Dimmer can be configured to connect up to two PulseWorx UPB Remote Wall Switches of any type to remotely control the Relay/Dimmer. Out of the box, the Relay/Dimmer only controls LED fixtures with the RM-0-10V Receiving Module (sold separately). The switch can be reconfigured to transmit and receive remote UPB commands with the UPstart configuration program or similar UPB Setup Tool. Once the Relay/Dimmer is configured to work with other UPB devices, it can be programmed into UPB networks and included in up to 2 lighting scenes. The Relay/Dimmer features a low-profile, decorator design to blend in with your decor. It mounts in a single- or multi-gang box and supports 3-way control when used in conjunction with an additional PulseWorx UPB switch (sold separately). NOTE: Neutral wire required. Requires the RM-0-10V, sold separately, to operate LED fixtures. Requires UPstart configuration in order to include into UPB networks. SPECS: Part #: WS1C-G. Power Requirements: Primary: 120 Volts AC, 50/60Hz. Load Type: 0-10V LED driver. Transmission Channels: 2 L...

    • Brand: Powerline Control Systems (PCS)
    • ASIN: B07BKBFVLW
    • UPC: 811976014430

  • PCS PulseWorx UPB Wall Switch-Relay/Dimmer, Light Almond (WS1C-LA)

    Replace a standard light switch with a UPB controlled dimmer switch! The PCS PulseWorx Wall Switch Relay/Dimmer (15A) replaces an existing switch to deliver both remote and local On/Off/Dim control for connected LED loads. The Relay/Dimmer can be configured to connect up to two PulseWorx UPB Remote Wall Switches of any type to remotely control the Relay/Dimmer. Out of the box, the Relay/Dimmer only controls LED fixtures with the RM-0-10V Receiving Module (sold separately). The switch can be reconfigured to transmit and receive remote UPB commands with the UPstart configuration program or similar UPB Setup Tool. Once the Relay/Dimmer is configured to work with other UPB devices, it can be programmed into UPB networks and included in up to 2 lighting scenes. The Relay/Dimmer features a low-profile, decorator design to blend in with your decor. It mounts in a single- or multi-gang box and supports 3-way control when used in conjunction with an additional PulseWorx UPB switch (sold separately). NOTE: Neutral wire required. Requires the RM-0-10V, sold separately, to operate LED fixtures. Requires UPstart configuration in order to include into UPB networks. SPECS: Part #: WS1C-LA. Power Requirements: Primary: 120 Volts AC, 50/60Hz. Load Type: 0-10V LED driver. Transmission Channels: 2 ...

    • Brand: Powerline Control Systems (PCS)
    • ASIN: B07BKB9YRF
    • UPC: 811976014409