• Trend Snap/Th/1 Trend Snappy Tool Holder - 30 Piece

    Heavy duty fabric tool holder.With elastic pockets to hold Snappy shanks. Supplied with a snappy pencil.Tool holders have a belt strap and are Velcro fastening.Tools contents not included.SPECIFICATION:Holding capacity=30 piecesSize closed=140 mm x 165 mm1 x Snappy Pencil

    • ASIN: B003G2Z63A

  • TREND SNAP/FMD/1 SNAPPY FLEXIBLE MAGNETIC DRIVER by Trend

    Flexible shaft bit holder for insert and direct drive screwdriver bits. Allows access into awkward positions. Magnetic to hold screws. Not for use with flat bits, large drill bits, auger bits, forstner bits, nut drivers/setters and square drive adapters. Dimensions: Working length=300 mm Head diameter=24 mm Shank Length=1/4 inch hex Max. dia drill bit=10 mm Max. dia drill/countersink=12.7 mm Shank Diameter: 1/4 hex Diameter Metric: 24 Overall Length Metric: 300

    • ASIN: B01HR462W6

  • Trend SNAP/F/QC Trend Snappy Centrotec compatible quick chuck only - Silver by Trend

    An economical bit for cutting quick holes in timber.;With centre Point, back tapered cutting edge and ground chip breakers;Shank diameter: 1/4 inch Hex?

    • Color: Silver
    • Brand: Trend
    • ASIN: B01N9018AL

  • Trend Snap/Asa/2 Snappy Angle Screwdriver Attachment Mark 2

    90 degree angled screwdriver attachment allows access to tight corners.Quick change chuck ensure tool is held securely.Use with bit holders, direct drive or insert screwdriver bits, hex drills and drill/countersinks.SPECIFICATION:Overall length=145 mmShank Diameter=1/4 inch hexWidth=50 mmWidth with insert bit fitted=61 mmBody diameter=28 mmMaximum torque=60 Nm torque (612 kgf cm)1 x No 2 Pozi 50mm screwdriver bit1 x No 2 Pozi 25mm screwdriver insert bit

    • ASIN: B003871N7G

  • Trend SNAP/SB3/SET Snappy Screwdriver Bit Set (56-Piece) by Trend

    Assorted screwdriver bit set for a wide range of applications. Colour rings on bit shank to denote type for ease of identification. Set contains forty-eight 25mm insert bits and seven 75mm long power drive bits. High grade hardened tool steel. Includes a magnetic bit holder. Supplied in storage case. Dimensions: Shank Diameter=1/4 inch hex Shank Diameter: 1/4 hex

    • ASIN: B01HR52A9O

  • Trend Snap/Th1/Set Trend Snappy Tool Holder 30 Piece Bit Set

    heavy-duty fabric tool holder with a selection of assorted Snappy tools.With elastic pockets to hold Snappy shanks.Supplied with a snappy pencil. Tool holders have a belt strap and are hook and Loop fastening. Tool Holder Bit Set

    • Brand: Trend
    • ASIN: B000Y8RIIK

  • Trend Snap/Th2/Set Trend Snappy Tool Holder 60 Piece Bit Set

    Heavy-duty fabric tool holder available with assorted Snappy tools. Standard Quick Chuck, Masonry bits 5,6,7 & 8mm, Drill bit guide No.6, No8.Drills 1,2,3,4,5,6 & 7mm, Auger bits 10 & 13mm, Flat bits 16, 19, 22, 25 & 30 mm.Drill countersinks 2.5, 3.25 & 3.5mm, Deburrer/countersink, Hole enlarger.Square drive adapter 1/4,3/8 & 1/2in, Screwdriver bit Pozi No.1,2,3.Magnetic drivers 6, 8, 10 & 12 mm. A/F, Snappy PencilInsert bits Magnetic bit holder (including 5 slotted 3 Pozi, 3 Phillips, 6 hex & 6 Torx). SNAP/TH2/SET TOOL HOLDER 60PC BIT SET

    • Brand: Trend
    • ASIN: B002SHLQYM

  • Trend - Snappy Stub Auger - SNAP/SA/19 by Trend

    Ideal for drilling between joists. Made from high quality carbon steel with screw thread and single spur. They must only be used with torque control drills. Dimensions: D=19 mm OL=105 mm Shank Diameter=1/4 inch hex Shank Diameter: 1/4 hex Diameter Metric: 19 Overall Length Metric: 105

    • ASIN: B01HR2ZI0K
    • UPC: 791429512853