• LC Engineering 1022033 - Mild Street Performer Camshaft 20R/22R/RE/RET

    This cam is a very mild upgrade over stock. This is what some would all a "RV" cam. This very mild cam is a perfect fit for our customers who want a new cam but don't want or need anything too big. It will work with all the stock valvetrain and even the stock EFI system. LC Engineering is constantly striving to improve both the quality and performance of our products. We test our camshafts on the street, race track and off-road. The results are an improved line of camshafts that offer a broader selection of grinds, increased horsepower and higher quality. All LC Engineering Camshafts are ground on new billets and double heat treated for long life. Each has been designed for maximum torque and horsepower, specifically for application. When comparing camshaft profiles, always reference the duration @ .050" valve lift. Choosing the correct camshaft and matching valve train components is crucial for maximum performance and reliability. LC Engineering offers a full selection of valve train components for your cylinder head. Questions? Call our customer service department for a recommendation. We'll make sure to get you the perfect cam to maximize your combination! 20R/22R - Mild Street Performer Camshaft 2WD or 4WD Carb/EFI (1000-4000 rpm) Smooth Idle, Stock Replacement Intake Exhaust...

    • Brand: LC Engineering
    • ASIN: B0757ZDLQG

  • Edelbrock 2024 Power Package Top End Kit 354 HP Incl. Performer RPM Intake/E-Street Heads/Performer Camshaft And Lifters/Timing Chain/Gasket Set/Bolt Kits Chevy Big Block Power Package Top End Kit

    The Edelbrock Total Power Package concept of selling dyno-matched components has been popular since the 1980s, but with the introduction of the Performer RPM Power Package Top End Kits, Edelbrock matched parts are now available under one part number!

    • Brand: Edelbrock
    • ASIN: B005128DRY
    • UPC: 085347020249

  • Ford 429 460 strip street ultimate K cam kit 1968 69 70 71 72 73 lifters springs (Timing Change Kit)

    FALCON ULTIMATE CAMSHAFT KIT fits Ford 429 (1968-73 car - except Boss) and 460 (car and truck 1973-85) with hydraulic flat tappets. Camshaft - Performer Class II street/strip cam - hydraulic flat tappet - great for mild bracket racing - good off-road cam 16 premium lifters - hydraulic flat tappets 16 valve springs Gaskets for cam change - CK4011 cam change kit - no intake valley pan Cam assembly lube 152 16 chrome moly valve spring retainers - 7-degree - chrome moly hardened 32 hardened 7-degree locks HD double timing set - 3-key - pictures are generic. you get what is described in the words.

    • Brand: Falcon Performance
    • ASIN: B0178JXHIW

  • Edelbrock 2204 Performer RPM Hydraulic Roller Camshaft

    The Edelbrock Performer RPM Hydraulic Roller Camshaft is designed for street high-performance and racing applications. These roller tappet cams reduce friction and virtually eliminate break-in problems. They also permit higher valve velocity, thus increasing performance while maintaining good manifold vacuum and drivability.

    • Brand: Edelbrock
    • ASIN: B000CN510E
    • UPC: 085347022045

  • Edelbrock 7102 Performer RPM Cam and Lifter Kit

    The Edelbrock Performer RPM camshaft kits are designed for high-performance street applications. These hydraulic lifter camshafts are dyno-matched to Edelbrock's Performer line of intake manifolds to provide increased horsepower and optimum torque from the low-end to the mid-range. The intake�valve�lift�with�factory�rocker�arm�ratio is 0.448 and exhaust valve lift is 0.510. Headers, high energy ignition systems, lower than stock rear end gearing and a high performance torque converter in automatic transmission equipped vehicles are necessary to gain all of the performance in these camshaft kits.

    • Brand: Edelbrock
    • ASIN: B000CN549C
    • UPC: 085347071029

  • Edelbrock 2261 Performer RPM Hydraulic Roller Camshaft

    The Edelbrock Performer RPM hydraulic roller cams feature more aggressive profiles without excessive valve overlap. The roller lifters reduce friction significantly and eliminate break-in problems. They also permit higher valve velocity, increasing performance while maintaining good manifold vacuum and drivability. These cams are for high performance street use only and are not for heavy vehicles. They should be used with Edelbrock or other aftermarket cylinder heads, adjustable valve train components and at last 9.5:1 compression ratio. Headers, high energy ignition systems, lower than stock rear end gearing and a high performance torque converter in automatic transmission equipped vehicles are necessary to gain all of the performance in these camshaft kits. In some designs the camshaft also drives the distributor and the oil and fuel pumps.

    • Brand: Edelbrock
    • ASIN: B000CN6WX4
    • UPC: 085347022618

  • Ford Mercury camshaft kit lifters cam 352 390 428 FE street performer 270H (Torque Cam)

    This listings is for a Cam and lifter kit - Ford Lincoln Mercury 1961-76 352 390 428 flat tappet app. New in box. Street performance cam and lifters w/lube.Cam will be a 24218 Melling or an E963P Elgin Cam which ever is available at time of purchase.

    • Brand: Falcon Performance
    • ASIN: B017878PEU

  • Dodge Chrysler 318 340 360 Cam+ Lifters Kit mild street performer 1967-up (Torque Cam)

    This listing is for a street flat tappet camshaft and lifter kit for 1967-up Chrysler/Dodge/Plymouth passenger cars / trucks with the 318ci 340ci 360ci V-8 engines. P/N CL3003.

    • Brand: Falcon Performance
    • ASIN: B0179ZCUZG

  • Edelbrock 7162 Performer Cam and Lift Kit

    The Edelbrock Performer RPM Camshaft and Lift Kit are the heart of the total power package. Edelbrock designs them to perfectly match the power band of their Performer RPM Series of intake manifolds. They do this by testing and tuning them together on engine dynamometers for maximum performance. The Performer RPM cams have more lift and duration than most street camshafts. It is designed for increased horsepower and street high performance applications. They offer improved throttle response and torque. The intake�valve�lift�with�factory�rocker�arm�ratio is 0.560 and the exhaust valve lift is 0.573. The intake duration�at�0.050 inch lift is 240 and the exhaust duration is 246. The style of the cam and lifter kit is hydraulic flat tappet and the basic operating RPM range is 1,500-6,500. The retainers, locks, valve stem seals, timing chain and gears, pushrods, rocker arms and gaskets are not included. Each kit includes a camshaft, hydraulic lifters, assembly lube, and instructions.

    • Brand: Edelbrock
    • ASIN: B000CNAT4M
    • UPC: 085347071623