• Air Duct Fan Speed Controller

    Specification: Voltage: AC120V,60Hz 5A Max. Power: 600W Package include: 1x Speed Controller 1x Manual

    • Brand: CISNO
    • ASIN: B01KJPMZYO

  • PWM AC Motor Speed Control Controller 2000W(max) SCR Voltage Regulator Adjustable 50-220V 25A LED Dimmers

    Description: This controller uses novel bi-directional high-power SCR. It can be very convenient adjust the current up to 25A, and solve the over current problem of the heating wire resistance is too small in the case of cooling causing good. The output voltage is adjusted anywhere between 50V-220V for use with electrical appliances. It can be used for electric stove, water heater tune thermal, lighting dimmer, small motor speed, electric iron thermostat, and achieve dimming, thermostats, pressure regulator effect. Package Included: 1 pcs x 50-220V 25A AC Motor Speed Controller

    • Brand: Yosoo
    • ASIN: B01N4L7U2Z
    • UPC: 712190270728

  • Huanyang Water Cooled CNC Spindle Milling Motor 110V 800W 24000RPM 400hz ER11 Collet

    Applicable VFD:https://www.amazon.com/dp/B0775RVHVB?th=1Introduction:The bearing adopts high speed angular contact bearing.And shell is cooled by liquid cycle to reduce the heat rise caused by high-speed rotation.Adopt precision steel ball holder to ensure the rotation precision of the spindle in high speed grinding.Lubricated with grease, which is resistant to 200 degrees high temperature. specification :●Material: The cover is made of stainless steel, and the water jacket is high compression casting aluminum tube, red copper coil.●Bearing: 7002 bearing (2pcs), 7000 bearing (2pcs)● Voltage and rated current: AC 110V, 5A● Max Rotation Speed:24,000 RPM●Radial runout:0.01mm ●Coaxality: 0.025mm (2.5 microns) ● Frequencies: 400Hz●Size: Size: 65*195 (mm)●Collet:ER11 collet, 6mm is standard ●Nut model: ER11-A(B)●Cooling way: water cycling cooling way●Lubrication way: high temperature resistance grease lubrication●Power interface: GX16 water proof aviation plug marked with number 1, 2, 3, 4. Number 1, 2 and 3 interfaces are connected with inverter power U, V, W respectively. Number 4 is connected with earth wire

    • Color: 65mm-4 bearing
    • Brand: Huanyang
    • ASIN: B077BY11Q3
    • UPC: 724509858312

  • WEN 4208 8 in. 5-Speed Drill Press

    Remember when power tools were actually powerful? WEN’s 8-inch swing, 5-speed drill press is small but powerful enough to drill through metal, wood, plastics, and other materials. Max drill capacity is 1/2” in 1” thick cast iron. When you need accurate, repeatable holes, this tool will do the job more conveniently and precisely than a hand held drill. The perfect size for the shop and portable enough to take to the job. Constructed with a rigid frame consisting of cast iron: head, table, and base ensuring accurate holes. Its powerful induction motor features ball bearings for an extended life and it all comes together with smooth and balanced performance even at high speeds. The ½” chuck with JT33 spindle taper gives you versatility with a variety of bits. Worktable bevels 45° left and right for those tricky operations for the perfect right angles consistently. The base contains predrilled holes for mounting onto a bench or work stand. The slotted table allows for mounting clamps and vises for effective workholding. Since 1951, WEN has proudly produced innovative powered tools focused on value delivering meaningful features that will help you complete and enjoy the work as much as the project. Remember when you could drill holes in any material with ease? Remember WEN.

    • Color: One Color
    • Brand: WEN
    • ASIN: B00HQONFVE
    • UPC: 044459042082

  • WEN 4214 12-Inch Variable Speed Drill Press

    Remember when power tools were actually powerful? WEN’s 12-inch swing, variable speed drill press with laser centering device, is a powerhouse for your shop. Packed with features that you’ll find in larger more industrial type drill presses. This bench-top, cast iron drill press has the power to drill through metal, wood and other materials. Max drill capacity is 5/8” in 1” thick cast iron. The variable speed feature allows you to target in the exact speed (infinitely from 580-3200 RPM) that works for your project. While you are working you simply move a lever and adjust the speed as needed. No pulleys and belts to change! Our design uses a mechanical variable speed which allows for the same power and torque through the entire speed range. A digital readout powered by LED’s displays the running speed. Constructed with a rigid frame consisting of cast iron: head, table, and base, ensures accurate holes. Its powerful induction motor features ball bearings for an extended life and it all comes together with smooth and balanced performance even at high speeds. The 5/8” chuck with MT2 spindle taper gives you versatility with a variety of bits and features on-board chuck key storage, so you never have to hunt around for it. Worktable bevels 45° left and right for those tri...

    • Color: Yellow
    • Brand: WEN
    • ASIN: B00HQONFY6
    • UPC: 044459042143

  • WEN 4210 Drill Press with Laser, 10-Inch

    Remember when power tools were actually powerful? WEN’s 10-inch swing drill press with laser centering device is a powerhouse for your shop. Packed with features that you’ll find in larger, more industrial type drill presses, you can power through metal, wood and other materials with ease. Change from five speeds to target the exact RPM right for your project (600, 1100, 1700, 2400, 3100 RPM). Rigid frame construction of cast iron provides sturdiness and reliability. Its powerful induction motor features ball bearings for an extended life, all combining together with smooth and balanced performance at any speed. The 1/2” chuck with JT33 spindle taper gives you versatility with a variety of bits. Worktable bevels 45° left and right for those tricky operations for the perfect right angles consistently. Base has predrilled holes for mounting onto a bench or work stand. The X-pattern Class II 1mW laser locks-on to your drill points saving on guesswork and sparing expensive materials. A very versatile and valuable tool for any shop especially when you expand its range of use with optional accessories such as mortising attachment, drum sanders, circle cutters, etc… Since 1951, WEN has proudly produced innovative powered tools focused on value delivering meaningful features tha...

    • Color: Black
    • Brand: WEN
    • ASIN: B005UKGLAS
    • UPC: 044459042105

  • POWERTEC BF600 Heavy Duty Bench Buffer, 6-Inch

    POWERTEC Bench Buffer features powerful ½ HP motor for quick and efficient smoothing and polishing of metal and other materials. Cast iron base reduced vibration. Specifications- Motor: 120V, 60 Hz, 4A. No Load Speed: 3450 RPM. Max. Buffing Wheel Diameter: 6-Inch. Arbor Size: ½-Inch

    • Brand: POWERTEC
    • ASIN: B01BW8UOHC
    • UPC: 709619853389

  • DEWALT DW758 8-Inch Bench Grinder

    • Brand: DEWALT
    • ASIN: B0000224J4
    • UPC: 028875075800