• TeraFlex 1204800 TJ/XJ Rear Upper Shock Bar Pin Eliminator Kit

    The TJ rear upper shock bar pin eliminator kit increases your shock options by eliminating the need for a bar pin. Bar pins have the tendency to become loose and allow the shock eyelet to move side to side reducing shock effectiveness. The bar pin eliminator converts the shock to a traditional captured shock mount - and you can now forget about replacing broken bar pins. The eliminator kit installs in the place of the factory bar pin and includes adapter brackets, shock sleeves, and all necessary hardware.

    • Brand: Teraflex
    • ASIN: B006D9W5L4
    • UPC: 843885020271

  • Rubicon Express RE2051 Shock Mount Stud Kit

    RUBICON EXPRESS was founded in 1996. We've always been a company of dedicated off-roaders, and our goal has always been to provide Jeep enthusiasts with the highest quality suspension components at the greatest value possible. 15 years later, our focus hasn't wavered, and we're proud to be the industry standard in after-market Jeep suspension and drive-train products.

    • Brand: Rubicon Express
    • ASIN: B006GJOKAU
    • UPC: 614901440034

  • Neewer Professional Studio Broadcasting Recording Condenser Microphone & NW-35 Adjustable Recording Microphone Suspension Scissor Arm Stand with Shock Mount and Mounting Clamp Kit, Blue

    Description: *PLEASE NOTE: Sound Card, 48V Phantom Power, 1/4" to XLR Cable & XLR to XLR Cable are needed to purchase additionally.* NOTE: 1.The Condenser Microphone only works with the device that could provide enough power(Voltage Required:5V) for it. When connected with desktop computer, the Microphone could be used alone; When connected with laptop computer, please connect the laptop to electrical outlet, or use a 48V phantom power to get enough power if the sound is not clear and high enough. 2.If your device could not provide enough power(when used with Amplifier or Mixer, etc.), the sound volume recorded might be low, and please use a extra 48V phantom power adapter to connect it.(phantom power adapter is not included). 3.The microphone can not be used with mobile phone and tablet computer. *NOTE: It cannot work with Mac. 4.If you want better sound effect, a sound card should be used. 5.When recording, please put the microphone away from the amplifier to prevent recording noise due to amplifier. (1)NW-700 Condenser Microphone, Blue Has a cardioid pick-up pattern that isolates the main sound source and minimizes background noise, highlighting the performance with smooth frequency response range for best vocal. Low noise, wide dynamic range, high sensitivity output. Material...

    • Color: Black+Blue+Silver
    • Brand: Neewer
    • UPC: 191073001718

  • Eggsnow Microphone Shock Mount Clip Universal Mic Holder Stand Anti Vibration for AKG D230 Senheisser ME66 Rode NTG-2 NTG-1 Audio-Technica AT-875R

    Eggsnow Camera Universal Microphone Shockmount Holder Clip for AKG D230, Senheisser ME66, Rode NTG-2,NTG-1,Audio-Technica AT-875R etc (Shock Mount) It features a four-point suspension to accommodate shotgun microphones measuring 0.99" to 1.5" (25-38mm) in diameter. The shockmount is easily angled with its rubberized adjustment knob. There is a built-in shoe for camera mounting, and a 3/8"-16 thread connection at the base mounts the shockmount to boompoles and universal hand-grips. Good to know: The Microphone shock mount is the essential tool for any shotgun microphone It will reduce the vibration so that your sound will sound perfect. It will mount on any camcorder with a standard hot shoe connector It will mount on a boom pole with 3/8 or 1/4-20 threaded mount will also adapt to any mike stand with a 5/16 connector making it a truly universal product. Package List : 1 x Mic shock mount (Not Including the Microphone) 8 x Rubber bands

    • Color: Black
    • Brand: Eggsnow
    • ASIN: B00KXQIU5S
    • UPC: 638142981279

  • Monroe 904966 Strut-Mate Shock Mounting Kit

    Monroe Strut-Mate mounting kits are direct fit replacements designed to complement the ride control characteristics of Monroe struts. In addition, our full line will provide you with late model original equipment coverage. When doing strut replacements, it is important to do the complete job. This means not only replacing the struts but also inspecting and replacing worn strut mounts. Remember, worn strut mounts can adversely affect a vehicle's safety and handling. Not only are strut mounts a necessary component of the suspension system, they consist of rubber to metal bonded parts that wear out over time as well. Worn bearings may also cause noise, steering binding, vibration and vehicle pull. Strut-Mate mounting kits can include (as applicable by OE design): Strut Mount, Bearing, Upper Spring Isolator, Lower Spring Isolator, or Upper Spring Seat.

    • Brand: Monroe
    • ASIN: B000IYBBJM
    • UPC: 048598539663

  • Bestshoot Microphone Shock Mount Holder Clip + Hot Shoe Adapter + 5/8” to 3/8” Screw Adapter + 4pack Replace Silicon O Ring + Foam Handheld Grip for AKG D230 Senheisser Me66 Rode NTG-1 Audio Technica

    The Microphone shock mount is the essential tool for any shotgun microphone The foam handle grip with 1/4-20 thread holes on the botton ,remove the screws is a 3/8-20 thread  holes (can be mounted on a tripod with 1/4-20 or 3/8-20 Screw) The hot shoe with 5/8" Screw on the top and 1/4-20 thread holes on the botton(can be mounted on a tripod with 1/4-20 Screw ) Microphone shock mount will reduce the vibration so that your sound will sound perfect. It features a four-point suspension to accommodate shotgun microphones measuring 0.99" - 1.5" (25-38mm) in diameter. The shock mount is easily angled with its rubberized adjustment knob        Package List : 1 x Mic shock mount 1 x Hot shoe adapter 1 x Foam handle grip 1 x 5/8"-27 to 3/8 Hole 1 x 3/8 Male to 1/4" Female hole 4 x Rubber bands

    • Color: Set 1
    • Brand: Bestshoot
    • ASIN: B076HMZ1DM
    • UPC: 709327270782

  • Dorman HELP! 31001 Shock Bolt Kit

    Replace that worn original shock bolt with this 5-inch shock bolt. This bolt comes with bushings, nuts, and a washer for easy installation. This bolt works with eyelet mount shocks.

    • Brand: Dorman
    • ASIN: B000COB5BM
    • UPC: 037495310017

  • KYB SM5058 - Mount Kit

    KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.

    • Brand: KYB
    • ASIN: B000C44DIY
    • UPC: 781552950585

  • Neewer NW-800 Condenser Microphone Kit with USB 48V Phantom Power Supply, NW-35 Suspension Arm Stand, Shock Mount, Pop Filter for Home Studio Recording Broadcast YouTube Live Periscope(Black and Gold)

    Note: 1. NW-35 Mic Stand Max load: 35oz/1KG. This Stand is NOT Suitable for Blue Yeti USB Mic. 2.The microphone can not be used with mobile phone and tablet computer. NOTE: It cannot work with Mac. 3.If you want better sound effect, a sound card should be used.Note: The computer and sound card are not included 4.Please confirm if there are two jacks (one for mic, one for audio) equipped with your computer, or the mic might not able to be recognized by the computer. NW-800 Condenser Microphone The cardioid pick-up pattern minimizes background noise and isolates the main sound source. Low noise, wide dynamic range and high sensitivity output. Fashionable design. Noble and elegant appearance. Color: Black and Gold Weight: 11 ounces / 316 grams Material: Zinc Alloy and Steel Cable Length: Approx. 2.5 meters/8.2 feet USB 48V Phantom Power Supply Provides a 48V voltage to the condenser microphone, but it does not enhance the microphone sound quality and improve the normal volume. Balanced mic inputs and outputs to connect in-line with your mic and mixer. Low noise full-frequency response. On/off power switch and LED indicator. Color: Black Material: Plastic Housing USB Cable Length: 5 feet /1.5 meters The XLR Male to XLR Female Cable Length: 8 feet /2.4 meters (1) NW-35 Mic Stand Dou...

    • Brand: Neewer
    • ASIN: B078Y69R2X
    • UPC: 191073033474