• 0.375 inch D x 1 inch L Servo Shaft (24T spline )

    These servo shafts are extremely useful for a variety of applications. Machined from 7075 aluminum, the units are very strong and durable. Generally this 24T version will work with Hitec servos however, many of the new Hitec servos have a 25T spline so please be sure to double check your spline size before ordering. Patented

    • Brand: Actobotics
    • ASIN: B01AMFC9UQ

  • 0.375 inch D x 1 inch L Servo Shaft (25T spline)

    These servo shafts are extremely useful for a variety of applications. Machined from 7075 aluminum, the units are very strong and durable. Patented

    • Brand: Actobotics
    • ASIN: B01AMFCAQ4

  • C1 Spline Servo to 1/4" Shaft Coupler (Set Screw)

    This servo to shaft coupler is intended to fasten a 1/4" shaft to the output spline of a servo that has a 24 Tooth (C1) Spline. The coupler fastens to the servo by installing the stock servo screw down through the center of the part prior to inserting a 1/4" shaft into the bore. For a solid connection between the coupler and a shaft, we recommend that you use a 1/4" D-shaft so that the set-screw is able to tighten down on the flat and reduce any chance slippage. For round profile shafts we do offer a similar coupler that clamps around the shaft rather than using a set-screw. Patented.

    • Brand: Actobotics
    • ASIN: B00KRJ6MA6

  • Feetech FS90R 360 Degree Continuous Rotation Micro Servo with Wheel Geekstory(4 Pack)

    Feetech 360 degree continuous servo Dimensions: 23.2 * 12.5 * 22 mm Weight:9 g Operating Speed : 110RPM (4.8V) 130RPM (6V) Stall Torque : 1.3kg.cm/18.09oz.in(4.8V) 1.5kg.cm/20.86oz.in(6V) Operating Voltage: 4.8V~6V Control System: Analog Direction: CCW Operating Angle: 360degree Required Pulse: 900us-2100us Bearing Type: None Gear Type: Plastic Motor Type: Metal Connector Wire Length: 20 cm Wheel This black plastic wheel is press-fit onto the FS90R output gear shaft, and easy to make a nice drive solution for small robots. The wheels have silicone tires and measure 60 mm (2.36″) in diameter. Two additional mounting holes for 3-40 screws make it possible to use the wheel with several of mounting hubs. Document link: http://www.diymalls.com/files/FZ0101-01-FS90R-Servo.pdf Package Inlcuding: 4 x Feetech FS90R Servo 4 X Wheel with screw

    • Brand: Geekstory
    • ASIN: B079FRHBTR
    • UPC: 702795764357

  • 25T Set Screw Servo Shaft Coupler (Dongbu)

    These couplers allow you to connect a 1/4" shaft directly to your Dongbu servo spline. The set screw included with each shaft coupler works well with straight or d-shafts.

    • Brand: Actobotics
    • ASIN: B00KVN6X8Y

  • Aluminum Hi-Torque Servo Saver For 25T Spline Output Shaft (L) - 1Pc Red

    Aluminum Hi-Torque Servo Saver For 25T Spline Output Shaft (L) - 1Pc Red

    • Brand: GPM
    • ASIN: B01DDH6D70

  • ALUMINIUM SERVO SAVER FOR 25T SPLINE OUTPUT SHAFT AJUSTABLE HI-TORQUE - 1PC GunMetal Alloy FOR 25T SERVO

    ALUMINIUM SERVO SAVER FOR 25T SPLINE OUTPUT SHAFT AJUSTABLE HI-TORQUE - 1PC GunMetal Alloy FOR 25T SERVO

    • Brand: CrazyRacer
    • ASIN: B075DZGV75

  • Futaba .500

    Introducing our new, super strong, Servo Shaft Hub. This new horn is machined from 6061 T6 aluminum and tapped with (8) 6-32 holes. This shaft hub also works in conjunction with our ServoBlocks. Patented.

    • Brand: Actobotics
    • ASIN: B00KRJ63FA

  • Hitec .500" Servo Shaft Attachment

    These servo shafts are extremely useful for a variety of applications. Machined from 6061-T6 aluminum, the units are very strong and durable. They can be easily cut to various lengths for specialized applications.

    • Brand: Actobotics
    • ASIN: B00KRJ6D96
    • UPC: 885367272846