• Mountain MTN9001 Pilot Bearing Puller

    MTN9001 Features: -Can also be used to pull bearings or bushings from generators or starters. -Strength - helps pull out tough bearings. -Short length - allows reach into tighter areas. -Versatility - works on automobiles, trucks, and tractors. Product Type: -Pullers. Use: -Pilot Bearing. Quanitity: -Single. Generic Dimensions: -Only 7 1/2'' long. Dimensions: Overall Height - Top to Bottom: -2.6 Inches. Overall Width - Side to Side: -5 Inches. Overall Depth - Front to Back: -6.3 Inches. Overall Product Weight: -2.3 Pounds.

    • Brand: Mountain
    • ASIN: B000X282DM
    • UPC: 872857006715

  • Biltek Blind Hole 10pc Slide Hammer Pilot Bearing Puller Internal Extractor Removal Kit 10pc Blind Hole Slide Hammer Pilot Bearing Internal External Remover Puller Set

    NEW 10pc Blind Hole Slide Hammer Pilot Bearing Puller Internal Extractor Removal KitFeatures:Perfect for pulling jobs requiring an internal pull, such as pilot bearingsIncludes 8 expandable collets, Fitting a wide range of applicationsSelect the appropriate sized collet by comparing it with the applicationInsert collet, expand it to fit the hole, and attach the slide hammer assemblySpecifications:Slide Hammer Shaft: 1.2ft Long (390mm)Hammer: 2.15lb. (940g), 1000mm L.Condition: 100% Brand NewPackage Includes:1x Slide Hammer with T-Handle8x Collets 8 to 10mm (5/16" to 13/32")10 to 12mm (13/32" to 15/32")12 to 14mm (15/32" to 9/19")15 to 17mm (9/32" to 11/16")17 to 20mm (11/16" to 25/32")20 to 24mm (25/32" to 15/16")25 to 29mm (1" to 1-1/8")30 to 32mm (1-3/16" to 1-1/4")1x Carrying CaseInstructions not included

    • Brand: KapscoMoto
    • ASIN: B00L4AZVYA
    • UPC: 698056192659

  • CTA Tools 8070 Screw-Type Pilot Bearing Puller Tool

    CTA Tools 8070 Screw-Type Pilot Bearing Puller Tool removes fly wheel pilot bearings and bushing up to 7.5-Inch (19cm) long. Replacement Jaws available: No. 8070x06 Standard Jaw - internal diameter Ranges from 0.5 -1.5-Inch (13 - 38mm) and No. 8070x07 Small Jaw - internal diameter ranges 3/8-Inch - 1-3/8-Inch (9.5mm - 35mm). California Prop 65 - Warning, This product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

    • Brand: CTA Tools
    • ASIN: B005OH0KSG
    • UPC: 053001080700

  • Lisle 55600 Clutch Pilot Bushing Remover

    Uses hydraulic pressure to remove brass and bronze bushings. Screw the self-tapping tip 2-3 threads into the brass or bronze bushing. Then pump out the bushing with a grease gun. Fits brass or bronze bushings from 1/2 inch to 3/4 inch inner diameter. Not for use on steel bearings. Made of case hardened steel.

    • Color: U.S.
    • Brand: Lisle
    • ASIN: B0002KPZ08
    • UPC: 083045556008

  • Alltrade 648619 Kit 8 Pilot Bearing Puller Tool Set

    For removing pilot bearings and bushings from flywheel during clutch replacement. Heavy duty puller includes fingers with a 1-1/2-in length for extra deep reach. Positive engagement design locks tips of fingers behind bearing while expanding against inner diameter to grasp bearing firmly. Plated steel and black oxide. Storage case complete with laminated instruction sheets with photos. Meets or exceeds ANSI standards. Lifetime warranty.

    • Brand: Alltrade
    • ASIN: B0028QGTYU
    • UPC: 028907103877

  • OEMTOOLS 25089 Pilot Bearing Puller

    The OEMTOOLS 25089 is designed to remove the pilot bearing from the end of the crankshaft. Used to pull pilot bearing from end of crankshaft. Restriction plate prevents the jaws from spinning when force is applied

    • Brand: OEMTOOLS
    • ASIN: B075QWZT1Q
    • UPC: 076812250896

  • OTC 7318 Pilot Bearing Puller

    The OTC 7318 is designed to pull flywheel pilot bearings in close quarters where a slide hammer cannot be used. Operates on many models with engine in chassis. Capacity of 1/2” to 1-1/2”, I.D. Reach: 3/4".

    • Brand: OTC
    • ASIN: B000OCHF2A
    • UPC: 731413010552

  • 9pc Blind Hole Pilot Bearing Puller Internal Extractor Removal w/ Slide Hammer

    9pc Blind Hole Pilot Bearing Puller Internal Extractor Removal w/ Slide Hammer This Item Features: -Open clamps by turning handle clockwise to snug against the bearing for pulling out evenly without damage the parts. -For Pulling jobs requring an internal pull, such pilot bearing This Item Features: -Shaft : Slide hammer shaft 390mm long -Hammer : 2.15lb. (940g), 1000mm L Collect Size: -8~10mm (5/16"~13/32") -10~12mm (13/32"~15/32") -12~14mm (15/32"~9/19") -15~17mm (9/32"~11/16") -17~20mm (11/16"~25/32") -20~24mm (25/32"~15/16") -25~29mm (1"~1-1/8") -30~32mm (1-3/16"~1-1/4") -CARRYING CASE INCLUDED.

    • Brand: I_S IMPORT
    • ASIN: B00NYCWP5O
    • UPC: 000878954276

  • 8milelake 5pc Blind Hole Pilot Bearing Gear Puller Slide Hammer Removal Repair Kit

    2lb Slide Hammer (950grams) Bearing Extractor Collets With Internal Capacity From 3/8" (10mm) To 1-1/4" (32mm) Drop Forged Steel One Slide Hammer Assemble & Clamp . Open Clamps By Turning Handle Clockwise To Snug Against The Bearing For Pulling Out Evenly Without Damage The Parts Fully Chromed Carbon Steel Slide Hammer, 15" (382mm) Overall Length Bearing Extractor 1: 3/8" to 1/2" (10mm-14mm) Bearing Extractor 2: 9/16" to 11/16" (15mm-19mm) Bearing Extractor 3: 5/8" to 1" (18mm-25mm) Bearing Extractor 4: 1" to 1-1/4" (25mm-32mm) Open clamps by turning Handle clockwise to snug against the bearing for pulling out evenly without Damage the parts

    • Brand: 8MILELAKE
    • ASIN: B01MTL5O2P
    • UPC: 614019645413