• 4 Ft - 1/2" PEX Aluminum Heat Transfer Plates, (100/box) for Radiant Heating (HP-4) by PEX GUY

    This is a box of Genuine PEX GUY 4ft long Aluminum Heat Transfer Plates for 1/2" PEX tubing. Details: - Manufactured from stamped aluminum.- Nominal thickness of these plates is 0.016", with the length of 48" and the width of 4.38".- Compatible with all types and brands of 1/2" PEX tubing (5/8" OD). - Can be used for subfloor or sandwich type radiant heating installations to improve heat transfer properties of the system and lower the water supply temperature, thus reducing the heating bills. - Recommended spacing for parallel tubing runs is 8" OC. *** CALCULATIONS (assuming 8 inch spacing): Number of plates = sq area x 1.30 / length of plates *** - Example: 1000 sq ft area multiply by 1.30 = 1300ft of plates (650 plates of the 2ft version or 325 plates of the 4 ft version). Note: Do not overlap the ends of the plates, make sure you have at least 2-3 inches spacing from end to end.

    • Brand: PEX GUY
    • ASIN: B009KT7PO6

  • SharkBite Oxygen Barrier PEX Pipe 3/4 Inch, Orange Heat Radiant Barrier Tubing, U870O100, 100 Foot Coil

    SharkBite Orange PEX PipeSharkBite PEX Tubing is an excellent flexible water pipe tubing product for plumbing, radiant and hydronic systems. PEX tubing is flexible, easy to install and minimizes noise caused by water hammer. Designed for use on hot and cold potable water lines, ORANGE PEX tubing is commonly used for radiant floor and hydronic heating applications. SharkBite Connection System – Total Rough-in SolutionSharkBite PEX tubing can be used with SharkBite push-to-connect fittings, SharkBite barbed fittings, SharkBite manifolds and SharkBite valves. The combination of SharkBite push-to-connect fittings, manifolds, valves and PEX tubing is the fastest way to plumb any residential or commercial project. SharkBiteSharkBite is a provider of plumbing and water control systems for domestic, commercial and industrial applications. As the world leader and hallmark of push-to-connect plumbing solutions, our goal is to continue innovating the plumbing trade with new solutions that improve efficiency and performance. Trusted by plumbing professionals, SharkBite manufactures a wide range of plumbing fittings, water control valves and PEX pipe, making it the only total plumbing solution from meter to fixture.

    • Color: 100 Feet
    • Brand: SharkBite
    • ASIN: B007AH4CK0
    • UPC: 697285331006

  • 1/2 inch x 1000ft Pex Tubing Oxygen O2 Barrier EVOH, Pex-B Red 1,000 ft for Radiant Floor Heat (From VIVO)

    1/2" PEX Tubing with Oxygen Barrier (EVOH) is used for residential and light commercial radiant heating applications. With the same properties as PEX non barrier pipes, EVOH PEX barrier pipe keeps oxygen and other elements from infiltrating and corrupting the key mechanical components in heating systems. Tubing is marked every 5ft with length, ASTM standards, approvals, certifications, pressure ratings and other technical information. Warranty: Industry standard, 25-year manufacture's warranty. Applications: 1/2" PEX tubing w/ Oxygen Barrier is common for the following radiant floor heating applications -Structural concrete slabs (rebar or wire mesh reinforced slabs) -Non-structural slabs (thermal mass, gypsum slabs) -Staple-up (between joists) radiant floor heating with and without heat transfer plates -"Sandwich" types radiant heating (between subfloor and finished floor) -Snow & ice melting systems -Baseboard & radiator heating systems STANDARDS, CERTIFICATIONS & APPROVALS: -ASTM F876: Standard Specification for Crosslinked Polyethylene (PEX) Tubing -ASTM F877: Standard Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems -CSA B137.5: Cross Linked Polyethylene (PEX) Tubing Systems for Pressure Applications -All Oxy...

    • Color: Red
    • Brand: VIVO
    • ASIN: B00HFFCL9Q
    • UPC: 617401140770

  • 4 Loop 1/2" Pex Manifold Stainless Steel Radiant Floor Heating Set/Four Branch Kit from VIVO (PEX-M12-4) Not suitable for potable water applications

    PEX-M12-4 is a stainless steel 4 Loop Radiant Manifold kit from VIVO. Features include body flow meters with adjustable flow rates, isolation ball valve with 1" NPT thread made of high-quality brass forging, stem thermometers for both isolation ball valves, automatic air purge valves, ½" compression connectors, and mounting brackets. Each port is spaced 2" apart and has its own turn off valve. The entire manifold measures approximately 10" x 15" and has an approximate weight of 12lbs. PEX-M12-4 is commonly used for radiant floor heat systems and features easy installation. Complete kit as shown in the pictures provided (1 supply manifold, 1 return manifold, 4 flow meters, 8 adapters (1/2"), 2 isolation ball valves with 1" NPT and temperature gauges, 2 air vents, 2 drain valves, 1 heavy duty mounting bracket. Not suitable for potable water applications.

    • Brand: VIVO
    • ASIN: B011W54YL2
    • UPC: 641020645200

  • 2 Ft - 1/2" PEX Aluminum Heat Transfer Plates, (100/box) for Radiant Heating (HP-2) by PEX GUY

    This is a box of Genuine PEX GUY 2ft long Aluminum Heat Transfer Plates for 1/2" PEX tubing. Details: - Manufactured from stamped aluminum.- Nominal thickness of these plates is 0.016", with the length of 24" and the width of 4.5".- Compatible with all types and brands of 1/2" PEX tubing (5/8" OD). - Can be used for subfloor or sandwich type radiant heating installations to improve heat transfer properties of the system and lower the water supply temperature, thus reducing the heating bills. - Recommended spacing for parallel tubing runs is 8" OC. *** CALCULATIONS (assuming 8 inch spacing): Number of plates = sq area x 1.30 / length of plates *** - Example: 1000 sq ft area multiply by 1.30 = 1300ft of plates (650 plates of the 2ft version or 325 plates of the 4 ft version). Note: Do not overlap the ends of the plates, make sure you have at least 2-3 inches spacing from end to end.

    • Color: gray
    • Brand: PEX GUY
    • ASIN: B009KO7BNG

  • Mophorn Pex Tubing Oxygen Barrier Radiant Floor Heat Pex 1/2 Inch 300ft Pex Pipe Potable Water Tubing Avirulent Insipidity for Residential and Commercial Water Plumbing Application Red (300ft)

    Pex Tubing Oxygen Barrier Radiant Floor Heat Pex 1/2 Inch 300ft EVOH Pex-B Application:(common but not limited) Structural concrete slabs (rebar or wire mesh reinforced slabs). Non-structural slabs (thermal mass, gypsum slabs). Staple-up (between joists) radiant floor heating with and without heat transfer plates. "Sandwich" type radiant heating (between subfloor and finished floor). Snow & ice melting systems. Baseboard & radiator heating systems. Water supply system. Technical Data: PEX Type: PEX-B PEX Tubing Size: 1/2" Total Length: 300ft Outside Diameter: 0.625" Inside Diameter: 0.475" Pressure ratings: 80psi @ 200F, 100psi @ 180F, 160psi @ 73F Minimum Bending Radius: 5" (industry standard for 1/2" PEX) Standards, Certifications & Approvals: ASTM F876: Standard specification for crosslinked polyethylene (PEX) tubing. ASTM F877: Standard specification for crosslinked polyethylene (PEX) plastic hot- and-cold-water distribution systems. ASTM F2023: Standard test method for evaluating the oxidative resistance of crosslinked polyethylene (PEX) tubing and systems to hot chlorinated water. CSA B137.5: Crosslinked polyethylene (PEX) tubing systems for pressure applications. All oxygen barrier PEX tubing we sell meets and exceeds DIN 4726 standard for oxygen barrier requirements. AN...

    • Color: 1/2Inch 300ft
    • Brand: Mophorn
    • ASIN: B01MU9V0ZO
    • UPC: 601285860152

  • Happybuy Oxygen O2 Barrier PEX Tubing - 1/2 Inch X 300 Feet Tube Coil - Potable Water EVOH PEX-B Pipe for Residential Commercial Radiant Floor Heating Hot Cold Water Plumbing PEX Tubing (300Ft)

    Oxygen O2 Barrier PEX Tubing - 1/2 Inch X 300 Feet Tube Coil - Potable Water EVOH PEX-B Pipe for Residential Commercial Radiant Floor Heating Hot Cold Water Plumbing PEX Tubing ADVANTAGES of the Oxygen O2 Barrier PEX Tubing: Superior temperature and pressure ratings - Pex Tubing is a strong and flexible cross-linked polyethylene tubing with superior temperature and pressure ratings that is useful for plumbing project in commercial and residential hydronic radiant heating applications Prevents corrosion - PEX tubing was manufactured with an oxygen barrier add on which limits oxygen permeation and prevents corrosion of iron compound of metal parts in heating systems Durable freeze protection - The tubing composite also provides additional benefits of durable freeze protection by expanding and contracting to function as snow melting application Resistant to temperature aging - PEX tube is resistant to temperature aging and will provide you with longer life expectancy and maintenance free for exceptional performance TECHNICAL DATA: PEX Tubing Size: 1/2" OD: 0.625" ID: 0.475" Length: 300 Feet PEX Type: PEX-B Pressure Ratings: 80psi @ 200F, 100psi @ 180F, 160psi @ 73F Minimum Bending Radius: 5" (Industry Standard for 1/2" PEX) SDR-9 Dimensional Standards Marked every 5ft with technical...

    • Brand: Happybuy
    • ASIN: B072LW5H44
    • UPC: 601285880655

  • 4 Ft - 1/2" Omega Type PEX Aluminum Heat Transfer Plates, (100/box) for Radiant Heating (HPS-4) by PEX GUY

    This is a box of Genuine PEX GUY Omega 1/2" PEX Aluminum Heat Transfer Plates.Details:- 1/2" PEX piping snaps on to the plates. - Box of (100), 4 ft long Heat Transfer Plates for 1/2" PEX tubing. - Manufactured from stamped aluminum. - Nominal thickness of these plates is 0.016" with the length of 48" and the width of 4.38". - Compatible with all types and brands of 1/2" PEX tubing (5/8" OD). - Can be used for subfloor or sandwich type radiant heating installations to improve heat transfer properties of the system and lower the water supply temperature, thus reducing the heating bills. - Recommended spacing for parallel tubing runs is 8" OC.

    • Brand: PEX GUY
    • ASIN: B00FAVEF00

  • Happybuy Oxygen O2 Barrier PEX Tubing - 1/2 Inch x 1000 Feet Tube Coil - Potable Water EVOH PEX-B Pipe for Residential Commercial Radiant Floor Heating Hot Cold Water Plumbing PEX Tubing (1000Ft)

    Oxygen O2 Barrier PEX Tubing - 1/2 Inch x 1000 Feet Tube Coil - Potable Water EVOH PEX-B Pipe for Residential Commercial Radiant Floor Heating Hot Cold Water Plumbing PEX Tubing ADVANTAGES of the Oxygen O2 Barrier PEX Tubing: Superior temperature and pressure ratings - Pex Tubing is a strong and flexible cross-linked polyethylene tubing with superior temperature and pressure ratings that is useful for plumbing project in commercial and residential hydronic radiant heating applications Prevents corrosion - PEX tubing was manufactured with an oxygen barrier add on which limits oxygen permeation and prevents corrosion of iron compound of metal parts in heating systems Durable freeze protection - The tubing composite also provides additional benefits of durable freeze protection by expanding and contracting to function as snow melting application Resistant to temperature aging - PEX tube is resistant to temperature aging and will provide you with longer life expectancy and maintenance free for exceptional performance TECHNICAL DATA: PEX Tubing Size: 1/2" OD: 0.625" ID: 0.475" Length: 1000 Feets PEX Type: PEX-B Pressure Ratings: 80psi @ 200F, 100psi @ 180F, 160psi @ 73F Minimum Bending Radius: 5" (Industry Standard for 1/2" PEX) SDR-9 Dimensional Standards Marked every 5ft with techni...

    • Color: Red
    • Brand: Happybuy
    • ASIN: B072PRSM7T
    • UPC: 601285880648