• Kee Klamp Railing Flange Galvanized Iron Pipe Fittings - Fits 2" Schedule 40 Pipe

    Pipe sizes listed in charts are for Schedule 40 pipe. Call a Certified Product Specialist to order Kee Klamps for pipe other than Schedule 40 pipe.

    • Brand: Kee Klamp
    • ASIN: B00JG7W9QG

  • Kee Klamp 65-6 Railing Support 1"

    This fitting is designed for palm fixing guard railing and balustrades to walls, parapets, steps, and ramps. The upright cannot drop through the socket. Note: Should an upright be required to pass through the fitting, the base can be bored out to order.

    • Brand: Kee Klamp
    • ASIN: B005GVGEXK

  • Single Socket Tee

    Designed to give a 90° butt joint between two pipes. Frequently used for the joint between end uprights and the middle rail on safety railing where the site is straight and level. Also for base ties on racking. This fitting cannot be used where the pipe through sleeve 'A' is required to be joined within the fitting. Type 25 should be used when a join in the pipe is necessary.

    • Color: Gray
    • Brand: Kee Klamp
    • ASIN: B011QCXXN6
    • UPC: 707022347303

  • Kee Klamp 64-7 Railing Support 1-1/4"

    Designed for fixing guardrail and balustrades to walls, parapets, steps, and ramps. The upright cannot drop through the socket. Access to the top fixing hole is restricted by the position of the flange to the barrel. When selecting a hexagon head bolt or similar bolt fixing, the maximum length of the bolt including the head must not exceed 1". Note: Should an upright be required to pass through the fitting, the base can be bored out to order.

    • Brand: Kee Klamp
    • ASIN: B005GVCLB4

  • Side Outlet Elbow

    A 90° corner joint most frequently used for the top rail of safety railing. It can also be considered for the corner joint of benches, work tables, and other rectangular structures.

    • Brand: Kee Klamp
    • ASIN: B011QCYWH2

  • Flange

    This flange, with holes provided for countersunk flat head screw fixings only, is used on structures where the fixing required is positional only. Frequently used as a wall fixing bracket. It is not recommended for use as a base flange to support guardrailing or balustrading.

    • Brand: Kee Klamp
    • ASIN: B011QCYRH2

  • Crossover

    Designed to give a 90° offset crossover joint. Frequently used on safety railing, where, to reduce cost by minimizing the pipe cuts, a continuous horizontal rail is used. Pipe cannot be joined within this fitting. It may be also used to give intermediate levels on racks, etc, when horizontal ties between uprights across the section are not required.

    • Brand: Kee Klamp
    • ASIN: B011QCYH0O
    • UPC: 094717476036

  • Crossover

    Designed to give a 90° offset crossover joint. Frequently used on safety railing, where, to reduce cost by minimizing the pipe cuts, a continuous horizontal rail is used. Pipe cannot be joined within this fitting. It may be also used to give intermediate levels on racks, etc, when horizontal ties between uprights across the section are not required.

    • Brand: Kee Klamp
    • ASIN: B011QCYBBY

  • Malleable Plug

    A metal drive-in plug which is difficult to remove when installed

    • Brand: Kee Klamp
    • ASIN: B011QCZK14