• Cast Iron Shutter Ring Pull With Black Primer Finish

    A rough textured surface gives this shutter ring pull an old-world feel. Use it on Colonials, Tudors or any Romantic style of home. Cast from solid iron, nearly 1/4" thick! Powder coated to resist rust.Mounting plate: 2" W x 1 1/2" H x 3/16" Thick. Oval ring: 1 7/8" W x 1 5/8" H.

    • Brand: John Wright Company, Inc.
    • ASIN: B005TVUL36

  • Acme Cast Iron Mortise Shutter Hinges - 6 1/2" X 3 1/2"

    This set of Victorian style 6 1/2 inch x 3 1/2 inch Acme Cast Iron Mortise Shutter Hinges contains enough hardware for one window (2 left hand hinges, 2 right hand hinges and two sill mounted catches). Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the wooden window casement (much like a fancy interior door hinge).Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design. When fully open or closed the shutter locks into place, preventing lift-off from strong winds. The outer leaf also rises slightly when opening, keeping the shutter panel from scraping and binding against the sill. When needed, the shutters are easily lifted off without removing the hardware. Made of heavy duty cast iron, these hinges must be painted on all sides and surfaces prior to installation (please note: screws are not included).Dimensions (each hinge): 6 1/2" W x 3 1/2" H. Throw (distance between the two mortised sections when fully open): 4 1/4". When selecting the proper hinge size for your window, allow a minimum 1" clearance between the shutter and the surface of wall for ventilating purposes.

    • Brand: John Wright Company, Inc.
    • ASIN: B005TQB7DY

  • Pair Of Cast Iron Sun Flower Shutter Dogs - Lag Mounted

    These bold sunflower shutter dogs will add a cheery outlook to any home. Made of heavy duty cast iron, they're finished with a rust resistant black powder coat. Easily mounted to masonry with the included lag bolt (anchors recommended - not included).Dimensions. Tie back: 5 1/4" H x 2 5/8" W x 1 1/2" projection (at top). Bolt: 4 1/2" L x 3/8".

    • Brand: John Wright Company, Inc.
    • ASIN: B005T3IQFO
    • UPC: 633210601318

  • Cast Iron Bed Rail Bracket Set

    Cast iron bed rail bracket set. The female brackets measures 5 3/8" tall by 1 1/8" in width. The male bracket measures 3" tall by 1 7/8" in width. This set does not include screws.

    • Brand: John Wright Company, Inc.
    • ASIN: B005TROBUO

  • Ornate Cast Iron Double Hook

    Ornate, but far from delicate, this double hook is built for long-lasting wear. Swirls and notches adorn the lacquer finished cast-iron construction, adding a touch of elegance to your decor. Use it throughout your home for hanging coats and bags, or as an accessory for your coat tree or decorative back plate.Dimensions. Base plate: 2 3/8" H x 1 1/2" W. Overall height: 2 7/8" H. Projection: 3 3/4".

    • Brand: John Wright Company, Inc.
    • ASIN: B005TERJ5G
    • UPC: 633210600052

  • Pair Of Decorative Cast Iron Cabinet Hinges - 2" X 2"

    Ornamental cabinet hinges are a rarity today. These pretty Victorian reproductions are completely covered with a delicate vine pattern - even the barrels are decorated! The hinges have a loose pin, which simplifies installation and maintenance. Made of solid cast iron with a protective lacquer coating.Dimensions: 2" H x 2" W. Leaf thickness: 1/8" (approx). Hinges are 4" tall, including finials.

    • Brand: John Wright Company, Inc.
    • ASIN: B005TDOJEQ

  • Acme Cast Iron Mortise Shutter Hinges - 5" X 2 15/16"R-09Jw-375)

    This set of Victorian style 5 inch x 3 inch Acme Cast Iron Mortise Shutter Hinges contains enough hardware for one window (2 left hand hinges, 2 right hand hinges and two sill mounted catches). Unlike surface mounted straps, they are mortised into the edge of the shutter and the inside edge of the wooden window casement (much like a fancy interior door hinge).Mass produced by Lull & Porter in the mid-nineteenth century, the Acme hinge features a patented locking pintle design. When fully open or closed the shutter locks into place, preventing lift-off from strong winds. The outer leaf also rises slightly when opening, keeping the shutter panel from scraping and binding against the sill. When needed, the shutters are easily lifted off without removing the hardware. Made of heavy duty cast iron, these hinges must be painted on all sides and surfaces prior to installation (please note: screws are not included).Dimensions (each hinge): 5" W x 3" H. Throw (distance between the two mortised sections when fully open): 3 1/8". When selecting the proper hinge size for your window, allow a minimum 1" clearance between the shutter and the surface of wall for ventilating purposes.

    • Brand: John Wright Company, Inc.
    • ASIN: B005TQB6OE

  • John Wright Company JWR61701 Cast Iron Heirloom Christmas Tree Stand, Red

    Clean lines and brilliant colors give this tree stand the classic look that has been popular for several generations. Cast in iron with a baked-on enamel finish to resist rusting and chipping, the red Heirloom will be a part of your family tradition for a long, long time. with a centering spike and brass-plated hardware, this quality tree stand will hold up to an 8-Feet live tree securely. Start a Christmas tradition this year that will last for generations. John Wright cast iron tree stands are beautiful as well as functional. Made of powder-coated cast iron with a centering spike and brass-plated bolts. John Wright tree stands are rust resistant, chip resistant and a perfect addition to your holiday decor. 14-Inches square with a 6-Inch deep reservoir

    • Color: Red
    • Brand: Good Tidings
    • ASIN: B001H54BAC
    • UPC: 046714617011

  • Set Of Cast Iron New York Style Shutter Hinges With 1 1/2" Offset

    Authentic colonial style and a rough black finish make these classic New York strap hinges a great choice for period restorations. These very sturdy hinges lift off for easy maintenance and have a 1 1/2" offset (3" throw). Made from 1/4" thick cast iron, they are powder coated to resist rust.Dimensions. Strap: 4 5/16" H x 5 1/8" W. Thickness: 1/4". Offset: 1 1/2" (from back of strap to center of pintle). Throw: 3". Mounting plate: 3 3/8" H x 1 1/4" W x 1/4" thick.Technical Info with Diagram

    • Color: Black
    • Brand: John Wright Company, Inc.
    • ASIN: B005TUIVKC
    • UPC: 616909646739