• LLC Integral - Heavy Duty Toggle Switch - SPST On / Off Type / Heavy Duty Momentary Rocker Toggle Switch ON - OFF - ON Spring Loaded Toggle Switch

    Description: 1, Dielectric strength: 1000 V RMS (min) 2.Insulation resistance:100 M¦Ø(min) 3.Basal material:Poly propylene materials 4.Mechanical life:More than 50.000 cycles 5.Electrical life:More than 10,000 cycles 6.Environment temperature:- 25 degrees ~ 80 degrees Package Include: 1 x Heavy Duty Toggle Switch - SPST On/Off Type

    • Brand: LLC Integral
    • ASIN: B0768VNC8K

  • 2 Pcs On/Off 2 Terminal SPST Black Round Rocker Switch

    2 Pcs On/Off 2 Terminal SPST Black Round Rocker Switch by Trineybell

    • Color: Black
    • Brand: Trineybell
    • ASIN: B0057M4J4E

  • Switch Hardware Full Toggle-Integral Secondary Inner Seal (1 piece)

    Full Toggle Switch, 15/32-32 Thread Size, with Inner Seal, Black"

    • ASIN: B005T65YI8

  • 20A 120/277V Ivory 3-Way Commercial Grade Toggle Switch

    Specification:Strap Material: Zinc Plated SteelColor: IvoryTemperature: -40F - 167FAmps: 20Voltage: 120 / 277 ACStyle: Side WiredWidth: 3.280"Poles & Throws: 3-WaySpecification: UL Listed , CSA Certified, Verified to Fed. Spec. W-S-896, SP, DP, 3-way and 4-wayType: Toggle SwitchBody Material: UreaLength: 1.310"Number of Poles: 1Product Weight: 0.15UOM: eachCatalog Page: BBV11, Page 10-82Notes:Side WiredNylon toggle resists abuse and chemical attackIntegral ground terminal allows compliance to NEC Article 380-12Silver cadmium oxide contacts reduces contact erosion and prevents welding, providing long lifeOne piece rivetless spring contact arm and terminal plate assures proper contact alignment, reducing heat riseUser ready terminations for single, double pole and three-way types provides wiring ease and labor savingsGround terminal anchor hole forms conductor around terminal screw and provides wiring ease and labor savings

    • Brand: Hubbell Wiring Device-Kellems
    • ASIN: B07FHLRRWX

  • UTG LT-ELP123R-A 400 lm Sub-Compact LED AMBI Pistol Light

    UTG gen 2 enhanced 400 lumen sub-compact pistol light with 23mm flood focus IRB, ideal for instant target identification. Increased run time, 3V Cree LED technology with low profile Picatinny mounting deck and Ambit. Momentary/permanent on/off toggle switch, 1x CR2 battery, hard coat anodized for wear resistance.

    • Color: Black
    • Brand: UTG
    • ASIN: B01E9UJ4SA

  • Legrand-Pass & Seymour CS20AC3GRY Pass and Seymour CS20AC3-Gry Commercial Spec Grade 3-Way Switch 20A 120/277V, Gray (10 Pack)

    CS20AC3GRY. 20a 120/277Vac s wire Comm 3W SW GY . One-piece brass alloy contact arm for reliable electrical performance. . One-piece steel strap with integral ground is plated for corrosion resistance. . High strength thermoplastic polycarbonate toggle resists breaking and chipping under heavy abuse. . Heavy-duty toggle bumpers for smooth and quiet operation. . Back body made of glass-reinforced nylon. Locking support provides resistance to face and back body separation. .

    • Color: Grey
    • Brand: Legrand-Pass & Seymour
    • ASIN: B008SBWHWW
    • UPC: 785007126594

  • 10RD-10EMRkit with Model 10RD433 Digital Receiver and Model 10EMR4751 Round Push To Open Handicapped Wireless Commercial Exit Button

    10RD-10EMRkit Includes a 10RD433 Digital Receiver With Integrated Vestibule Sequencing Paired With Wireless Handicapped Push Button Model 10EMR4751 Digital Receiver 433 Mhz frequency. Includes integral sequencing "learn" buttons (for vestibule applications), pulse/toggle functionality and additional hold time. The 433 MHz Series Transmitters and Receiver are ideal for the wireless activation and/or sequencing of automatic doors. A unique rolling code is transmitted each time the transmitter is activated (thus providing a secure signal). Since receivers can be individually programmed, multiple receivers can be programmed differently thus allowing for sequencing in multiple applications. Those receivers programmed with NO DELAY will be active immediately upon receiving the transmitter signal. Those receivers programmed with a DELAY will activate at the end of their pre-determined time delay set by the potentiometer. The use of multiple receivers will allow for the uninterrupted pace or hands free operations through a pair of doors upon initial activation. The push button exit features a round slim profile with a blue Handicap logo and blue "push to open" text. Model 10RD433 Receiver • Operates with a unique rolling code each time the switch is activated • Multiple applications ...

    • Brand: FAS
    • ASIN: B074CB3R1D

  • 15A 120/277V Ivory Commercial Dbl Pole Toggle Switch

    Specification:Strap Material: Zinc Plated SteelColor: IvoryTemperature: -40F - 167FAmps: 15Voltage: 120 / 277 ACStyle: Back / Side WiredWidth: 3.280"Poles & Throws: Double PoleSpecification: UL Listed , CSA Certified, Verified to Fed. Spec. W-S-896, SP, DP, 3-way and 4-wayType: Toggle SwitchBody Material: PlasticLength: 1.310"Number of Poles: 2Product Weight: 0.1UOM: eachCatalog Page: BBV11, Page 10-83Notes:Back and Side WiredNylon toggle resists abuse and chemical attackIntegral ground terminal allows compliance to NEC Article 380-12Silver cadmium oxide contacts reduces contact erosion and prevents welding, providing long lifeOne piece rivetless spring contact arm and terminal plate assures proper contact alignment, reducing heat riseUser ready terminations for single, double pole and three-way types provides wiring ease and labor savingsGround terminal anchor hole forms conductor around terminal screw and provides wiring ease and labor savings

    • Brand: Hubbell Wiring Device-Kellems
    • ASIN: B07F48W9K8

  • 10RD433 Programmable 433 Mhz Wireless Digital Receiver

    Digital Receiver 433 Mhz frequency. Includes integral sequencing "learn" buttons (for vestibule applications), pulse/toggle functionality and additional hold time. The 433 MHz Series Transmitters and Receiver are ideal for the wireless activation and/or sequencing of automatic doors. A unique rolling code is transmitted each time the transmitter is activated (thus providing a secure signal). Since receivers can be individually programmed, multiple receivers can be programmed differently thus allowing for sequencing in multiple applications. Those receivers programmed with NO DELAY will active immediately upon receiving the transmitter signal. Those receivers programmed with a DELAY will activate at the end of their pre-determined time delay set by the potentiometer. The use of multiple receivers will allow for the uninterrupted pace or hands free operations through a pair of doors upon initial activation. Operates with a unique rolling code each time the switch is activated Multiple applications (i.e. Vestibule) with Delay or No Delay programming 100 transmitters can be programmed into a single receiver Removal of a single transmitter code Up to 4 separate wireless Receivers can be activated by a single Transmitter (i.e. 4-Button) Red LED indicator on Transmitter confirms transmi...

    • Brand: FAS
    • ASIN: B008Q5VH3K