• INCRA I-BOX Jig for Box Joints

    To get right to the point, the new INCRA I-Box is the most advanced tool ever produced for creating a stunning variety box joints & finger joints. Its revolutionary design allows faster setup, greater versatility, and improved user safety compared to traditional jigs. At the same time, it's easy to use and the included 1-hour instructional DVD covers everything from basic setup to advanced decorative joinery. The I-Box is an evolutionary leap forward from conventional box joint methods - this single jig can be used on both your table saw and your router table, and the IBox's dual pitch lead screw mechanics easily micro-adjust joint tightness and provide a whopping 1/8-Inch - 3/4-Inch range of pin widths. It's capable of making good fitting box joints using any width cutter within that range into lumber from 1/4-Inch to 1-Inch thick. The advantages continue far beyond the basics: I-Box-exclusive joints like the Center Keyed Box Joint can be used to produce symmetric patterns rather than ending your joint with a partial pin as often required with other traditional box joint jigs. The Splined Box Joint is yet another INCRA-only decorative joint that's guaranteed to add wow-factor to your projects, and the I-Box can even be used to produce an unlimited variety of classic dentil mould...

    • Brand: INCRA
    • ASIN: B008LD4S5G
    • UPC: 751922430092

  • INCRA Build-It System Starter Kit

    Quickly and easily create a wide variety of common and special purpose jigs and fixtures that you typically find hanging on the walls and rafters in just about any woodshop. The INCRA Build-It Modular Jig & Fixture Platform System is a highly versatile new method for creating those jigs and fixtures. The Build-It System begins with INCRA's Miter Slider adjustable aluminum runners. These tried and true jig and fixture runners have become a workshop staple for the production of sliding and fixed base jigs, but the true "punch" in the system occurs when these are combined with the NEW INCRA Build-It Panels and T-Slot Panel Connectors. The Build-It Panels are pre-cut and pre-drilled to instantly accept all of the components of the system. Add a Miter Slider in seconds and it's automatically square to your saw blade with no tedious measuring or drilling required, then mount a fence in moments using the counter-bored mounting holes. The "glue" that holds everything together is INCRA's innovative NEW T-Slot Panel Connector. These specially designed aluminum components serve to simultaneously interconnect the panels and provide a rock solid T-Slot for adding and holding jig accessories, fences, stops, Build-It Hold Down Clamps and Build-It L-Brackets. With this new system, set up and con...

    • Brand: INCRA
    • ASIN: B000YIWCYK
    • UPC: 751922369330

  • Incra IG32 Incra Gauge

    Quickly And Accurately Mark Out Reference Lines On Any Work piece. This Marking Gauge Can Be Used In Place Of A Ruler Or Adjustable Square. Precision Cast Saw Tooth Rack Locks The Gauge In At Exact 1/32" Steps. Made Of High-Impact Plastic.

    • Brand: INCRA
    • ASIN: B000I6NNQE
    • UPC: 751922020002

  • INCRA HingeCrafter

    Make Beautiful Wooden Hinges In 4 Sizes Up To 10" Long. A Spectacular Accent For Your Next Jewelry Box, Cabinet Door Or Hinged Table Leaf. Produces 3/8", 1/2", 5/8" And 3/4" Hinge Barrel Sizes. Works With Any Incra Incremental Fence System.

    • Brand: INCRA
    • ASIN: B001EYU97A
    • UPC: 751922110017

  • The Official INCRA Jig Handbook and Templates

    New 1989 never cracked open with complete Template sheet. Cover has small cover corner crease. FREE BONUS added. Incra Universal Precision Positioning Jig 14 page Owner's Manual. (1988 NEW).

    • ASIN: B000733TYE

  • INCRA IJ32FNCSYS Original Jig Fence System with MDF Fence and Shop Stop plus Aluminum Right Angle Fixture by Incra

    The T-slot fence easily accepts user-made sub-fences for zero clearance, edge forming cutters and the included stop positioner;Hundreds of dovetail variations easily made when these accessories are combined with the INCRA Jig

    • Brand: INCRA
    • ASIN: B01NCAQ3YN
    • UPC: 735090662738


    If You Own A Miter Gauge - Any Miter Gauge - You Can Turn It Into A Performance Boosting Miter Sled In Just A Few Seconds By Simply Docking It In Place On Top Of This Unique Sled. This Sled Is A Sliding, Miter-Cutting Platform That Fully Supports And Controls Your Work piece Throughout The Cut. Miter Gauges Drag Your Board Across The Table, A Sled Slides The Work piece Giving More Support And Control Creating Better, More Consistent Cuts. The Miter Express Is Designed To Let You Instantly Drop And Lock Your Miter Gauge Into The Sliding Platform. Once Docked, It Stays Put Until You Undock It To Switch Back To Your Regular Miter Gauge. The Sled Features A Built In Miter Bar That Is Adjustable For Zero Side Play Tracking, So Even If Your Old Miter Gauge Is Loose In The Miter Slot It Becomes Rock Solid Once Its Locked Into The Express. Other Features Include Two Embedded T-Tracks To Secure The Included Hold Down Clamp To Anchor Your Work piece, A Locking Drop Panel That Supports The Offcut, And Also Provides Zero Clearance Tear Out Control. Note: Miter Gauge Shown In Photo Available Separately., Upgrade Any Miter Gauge To A Miter Sled In Seconds. , Doubles Any Miter Gauge's Crosscut Range Up To 24" , Safely Handles Both Extra Large And Extra Small Work pieces. , Eliminates All Side P...

    • Brand: INCRA
    • ASIN: B000E327NG
    • UPC: 751922200510

  • Incra IMS1 18-Inch Incra Miter Slider

    Eliminate the tedious process of making, fitting and adjusting the wooden runners on your sliding table saw jigs. Just screw these special extruded aluminum runners to your jigs and you're ready! Miter sliders have unique expansion mechanisms in their body that perfectly adjust to any standard 3/4" x 3/8" miter gauge slot. Each Slider includes plans for building a variety of table saw jigs.

    • Brand: INCRA
    • ASIN: B0000DD1DT
    • UPC: 785533680591