• Duralight Furnace Hot Surface Ignitor Direct Replacement For Trane - American Standard IGN00026 / IGN00030

    The Duralight® DL-409B silicon carbide ignitor from OneTrip Parts® replaces virtually all models in the field with a 2" wide ceramic base. The ceramic block on this ignitor is 2" wide, 7/8" deep, and 5/8" thick. There are locating ridges on all four corners of the ceramic block. The heating element portion of the ignitor is 2-1/4" long. The 6" long wire leads come with .096" pins installed and two plug housings are included which snap on to the pins. CAUTION: The pins lock in to the plug housing and can not be removed without a special tool once they are locked in. Two high temperature ceramic wire nuts are also included and can be used if your existing plug is damaged or the wire is not long enough. This ignitor will replace the following models: Carrier / Bryant / Payne LH33ZS001, LH33ZS002, LH33ZS003, and 33ZS004, Ducane 20015201, Norton 201, 271, and 271M, Raypack 600915, Roberts Gordon 90434300, Robertshaw 41-403, 41-407, and 41-409, ICP / Snyder General / Heil / Comfortmaker / Tempstar 1380654, 1380672, and 1380680, Trane / American Standard B138196P01, B144676P02, IGN26, IGN30, IGN00026, and IGN00030, Weil-McLain 511-330-139 and 511-330-193, White-Rodgers 767A-370 and 767A-376. This part is covered by the exclusive Duralight® two year limited replacement policy. If this...

    • Brand: Duralight
    • ASIN: B017L2H71E
    • UPC: 818742013901

  • Emerson 767A-369 Hot Surface Ignitor, 120V, Silicon Carbide

    The White-Rodgers 767A-369 Hot Surface Ignitor features 11" leads, 200 Degree insulation, and Molex internally keyed connector with .093" male pins.

    • Color: 6
    • Brand: Emerson Thermostats
    • ASIN: B000ZBURFW
    • UPC: 783961358112

  • Emerson 768A-844 Hot Surface Ignitor, 80V, Silicon Nitride

    The White-Rodgers 768A-844 Hot Surface Ignitor features white Teflon coated leads, and 2 terminal AMP receptacle with .084" female socket. This ignitor must be used with hot surface ignition for residential furnaces (Silicon Nitride replacement only).

    • Color: 1.6
    • Brand: Emerson Thermostats
    • ASIN: B0039VQDNK
    • UPC: 786710502132

  • Rheem SP14218A 18-Inch Hot Surface Ignitor

    The Rheem SP14218A is a hot surface ignitor. HVAC replacement part Rheem SP14218A. Get your system working properly once again with replacement parts.

    • Brand: Rheem
    • ASIN: B00G2DL8GY
    • UPC: 020352570051

  • Duralight Furnace Hot Surface Ignitor Direct Replacement For York Coleman Evcon Luxaire 025-32625-000

    This hot surface ignitor is the replacement for many York, Luxaire, Coleman, Coleman-Evcon, Fraser/Johnson, and Air Pro furnaces made by Unitary Products Group. This ignitor has insulated wires that are 5-1/4" long. The wires are terminated with the proper OEM plug (see photos) and requires no splicing or modifications. This part will also replace the spiral ignitor used on models P1UK, P9MP, P2MP, P2DP, PAKU, PBKM, PBKD, XEUO2, XEMO2, and XEDO2. This part replaces part numbers 025-32626-000, 025-31801-000, 025-30277-700, 025-31802-000, 025-30385-700 and 025-32625-000. These ignitors are extremely fragile and should be handled with care. Do not touch the grey ignitor portion with bare hands, the oil in your fingers can cause a "hot spot" and lead to premature failure. This part is covered by the exclusive Duralight® two year limited replacement policy. If this part fails within two years from date of purchase, return the defective part and a copy of the original invoice to the place of purchase for replacement. Contact the authorized Duralight® dealer that you purchased the part from for details. Original equipment manufacturer's brand name(s) and part numbers are used for identification purposes only. This item is supplied by OneTrip Parts® and meets or exceeds original equip...

    • Brand: Duralight
    • ASIN: B007UTWJH6
    • UPC: 818742010139

  • Furnace Hot Surface Ignitor Direct Replacement For Carrier Bryant Payne OEM Part LH33ZS004

    This ignitor is the "wide" style used on many Carrier, Bryant, Payne, and Day & Night gas furnaces. The ceramic block on this ignitor is 2" wide, 7/8" deep, and 5/8" thick. There are locating ridges on all four corners of the ceramic block. The heating element portion if the ignitor is 2-1/4" long. The lead wires are 5-1/4" long and are terminated with a plug that has two male pins inside a housing that has one square end and one pointed end. This connection style was used on many Carrier, Bryant, Payne, and Day & Night furnace models. Two high temperature ceramic wire nuts are also included and can be used if your existing plug is damaged or is not long enough. This ignitor is the replacement for Carrier Bryant Payne Day & Night part numbers LH33ZS001, LH33ZS002, LH33ZS003, and LH33ZS004.

    • Brand: Payne
    • ASIN: B00E3CDPLM
    • UPC: 641517715522

  • White Rodgers 21D64-2 Universal Silicon Nitride Hot Surface Igniter

    The 21D64-2 upgrades silicon carbide integrated or non-integrated systems to long-lasting and durable nitride. The nirtride ignitor is connected in the existing HSi system, ensuring consistent performance and long ignitor life. The 21D64 kit includes everything needed for a quick installation.

    • Color: n/a
    • Brand: White Rodgers
    • ASIN: B00BTLLJ40
    • UPC: 786710529443

  • OEM Upgraded Replacement for Goodman Furnace Hot Surface Ignitor / Igniter 201657-03S

    This is a Brand Furnace Hot Surface Ignitor.

    • Brand: part
    • ASIN: B00E5LPVQ8

  • Duralight Ignitor Universal Replacement for Coleman Evcon Mobile Home Furnaces 1474-051P, 1474-052P, and 025-41021-000

    This hot surface ignitor is the universal replacement for many Coleman, Coleman-Evcon, and Air Pro mobile home furnaces made by Unitary Products Group. This ignitor has insulated wires that are 11-1/4" long. Two high temperature ceramic wire nuts are included. Simply strip your existing wires and twist together. These ignitors are extremely fragile and should be handled with care. Do not touch the grey ignitor portion with bare hands, the oil in your fingers can cause a "hot spot" and lead to premature failure. This part is covered by the exclusive Duralight® two year limited replacement policy. If this part fails within two years from date of purchase, return the defective part and a copy of the original invoice to the place of purchase for replacement. Contact the authorized Duralight® dealer that you purchased the part from for details. Original equipment manufacturer's brand name(s) and part numbers are used for identification purposes only. This item is supplied by OneTrip Parts® and meets or exceeds original equipment specifications.

    • Brand: Duralight
    • ASIN: B0768Q3VQL
    • UPC: 818742014526