• Easy Heat AHB-019 Cold Weather Valve and Pipe Heating Cable, 9 feet

    Temperature-controlled cable runs straight along pipe and valves, held in place by application tape and plugs into grounded electrical outlet. Keeps water flowing down to -380. For odd lengths of pipe over 3/4 inches in diameter, we recommend two separate cables on opposite sides of the pipe with up to 3 feet of overrun at center of pipe run. Metal pipe requires 1/2-inch fiberglass insulation around cable. For plastic pipe, its recommended wrapping pipe with aluminum foil before cable installation. The traditional resistance cable produces a fixed amount of heat based on the electrical line feed. It comes with a built-in thermostat that switches the flow of electricity on and off based on temperature. Cable installs fast and easy. Each package contains grounded plug, built in thermostat and instructions. Cable has weather resistant PVC outer jacket and inner insulation. Keeps water flowing down to 40 F.

    • Brand: Easy Heat
    • ASIN: B00002N6MB
    • UPC: 718472677261

  • BriskHeat FFSL1-6 SpeedTrace Self-Regulating Heating Cable, Polymer

    SpeedTrace Pre-Assembled Self-Regulating Heating Cable - BriskHeat SpeedTrace heating cables are an ideal solution for Ideal for easy to install pipe freeze protection and safe thawing of metal and plastic pipe & valve assemblies. May be used on metal and plastic water pipes, for pipe heating, but not on flexible vinyl tubing, (such as garden hoses). SpeedTrace Heating cable self-regulates the pipe heating cables temperature by automatically adjusting electric cable heat output based on surface and ambient temperatures. Plug-and-Play easy to install pipe heating solution! Automatically adjusts heat output based on surface and ambient temperatures No temperature controller is required. Plug-in ready pre-assembled power cord. Grounded design for added safety. Suitable for extreme cold conditions as low as -40°F (-40°C).Safe for indoor and outdoor use. Safe to overlap heating cable for easy installation. Use with Insul-lock° DS foam insulation for maximum thermal efficiency.

    • Brand: BriskHeat
    • ASIN: B0741D8FYS

  • Heavy Duty Ice Dam Heat Tape By Radiant Solutions Company, Plug-In, Self-Regulating, 120 volt with 48” lead and plug that illuminates while cable is in use (6 Feet)

    Goodbye ice dams on your roof and in your gutters. We are a direct-to-consumer manufacturer with over 25 years in the business of ice dam prevention. Don't buy cheap cables (yes, we mean you, EasyHeat). Our Self-regulating heat tape can be overlapped during installation, unlike the cheap stuff, which will burn out when it happens to overlap. Our heat cable generates 9.6 watts per foot of output at 32 degrees, creating a clear melted pathway through any ice or snow on your roof. This is not your grandpa's heat cable. This is serious stuff and holding it in your hand will tell you as much. Our pre-terminated, plug-in ready heat cables are ideal for people with areas on their home that suffer from reoccurring ice dams. HeatTapePro is a worry-free, long term solution to your ice dam problems. Because this product is self-regulating, it 'asks' for more energy as it gets colder outside and less energy when it's warmer. Why have heat cables running when it's 45 degrees outside? That is how cheap, constant wattage heat cables operate. Not good. HeatTapePro is jacketed with a commercial grade fluoropolymer and comes standard with a flame retardant thermoplastic interior jacket. Our 16 gauge heating wires are 200% thicker than the conductors found in cheap, constant wattage cables like Eas...

    • Brand: Radiant Solutions Company
    • ASIN: B01N4BS5XD
    • UPC: 765407319208

  • BriskHeat FFSL1-24 SpeedTrace Self-Regulating Heating Cable, 24'

    SpeedTrace Pre-Assembled Self-Regulating Heating Cable - BriskHeat SpeedTrace heating cables are an ideal solution for Ideal for easy to install pipe freeze protection and safe thawing of metal and plastic pipe & valve assemblies. May be used on metal and plastic water pipes, for pipe heating, but not on flexible vinyl tubing, (such as garden hoses). SpeedTrace Heating cable self-regulates the pipe heating cables temperature by automatically adjusting electric cable heat output based on surface and ambient temperatures. Plug-and-Play easy to install pipe heating solution! Automatically adjusts heat output based on surface and ambient temperatures No temperature controller is required. Plug-in ready pre-assembled power cord. Grounded design for added safety. Suitable for extreme cold conditions as low as -40°F (-40°C).Safe for indoor and outdoor use. Safe to overlap heating cable for easy installation. Use with Insul-lock° DS foam insulation for maximum thermal efficiency.

    • Brand: BriskHeat
    • ASIN: B0741C1FQP

  • SpeedTrace Extreme Heating Cable, 8 watts/ft, 120V, 24ft with plug

    Speed Trace Extreme Pre-Assembled Self-Regulating Heating Cable for Extreme Cold Conditions -Brisk Heat Speed Trace heating cables are an ideal solution for Ideal for easy to install freeze protection and safe thawing of metal and plastic pipe & valve assemblies. May be used on metal and plastic water pipes, but not on flexible vinyl tubing, (such as garden hoses). Speed Trace Heating cable self-regulates the pipe heating cables temperature by automatically adjusting electric cable heat output based on surface and ambient temperatures.- Automatically adjusts heat output based on surface and ambient temperatures- No temperature controller is required- Plug-in ready pre-assembled power cord- Grounded design for added safety- Suitable for extreme cold conditions as low as -40°F (-40°C)- Safe for indoor and outdoor use- Safe to overlap heating cable for easy installation- Use with Insult-lock° DS foam insulation for maximum thermal efficiency- Supply voltage: 110-120VAC or 208-277VAC- Nominal Power Output- Speed Trace: 5 watts/ft. (16 watts/m) at 50°F (10°C)- Speed Trace Extreme: 8 watts/ft. (26 watts/m) at 50°F (10°C)- Maximum exposure temperature 150°F (65°C)- Moisture and flame resistant thermoplastic elastomer outer jacket- 16 AWG bus wires- Pre-terminated 30” (76cm) l...

    • Color: Black
    • Brand: BriskHeat
    • ASIN: B00MAO5ZA4
    • UPC: 696859236563

  • BriskHeat FFSL1-18 SpeedTrace Self-Regulating Heating Cable, Polymer

    SpeedTrace Pre-Assembled Self-Regulating Heating Cable - BriskHeat SpeedTrace heating cables are an ideal solution for Ideal for easy to install pipe freeze protection and safe thawing of metal and plastic pipe & valve assemblies. May be used on metal and plastic water pipes, for pipe heating, but not on flexible vinyl tubing, (such as garden hoses). SpeedTrace Heating cable self-regulates the pipe heating cables temperature by automatically adjusting electric cable heat output based on surface and ambient temperatures. Plug-and-Play easy to install pipe heating solution! Automatically adjusts heat output based on surface and ambient temperatures No temperature controller is required. Plug-in ready pre-assembled power cord. Grounded design for added safety. Suitable for extreme cold conditions as low as -40°F (-40°C).Safe for indoor and outdoor use. Safe to overlap heating cable for easy installation. Use with Insul-lock° DS foam insulation for maximum thermal efficiency.

    • Brand: BriskHeat
    • ASIN: B0741D4ZWD

  • EasyHeat 2102 Freeze Free Heating Cable - 100'

    EasyHeat Freeze Free self-regulating pipe heating cables provide flexible protection against pipe freeze-ups in the most challenging applications. The cut-to-length technology is ideal for installations that require protection of numerous pipes of varied lengths. The self-regulating effect of the cable reduces power consumption when the pipe does not require freeze protection. They are ideal for use on residential metal or plastic water supply and drain pipes subject to freezing temperatures; water supply lines underneath manufactured homes; and cottages, barns and outbuildings that are not regularly used.

    • Brand: Easy Heat
    • ASIN: B002KT5ZPO
    • UPC: 013627068957

  • M-D Building Products 64444 30-Foot Pipe Heating Cable with Thermostat

    "M-D BUILDING" PIPE HEATING CABLE UL and CSA approved pipe heating cable is designed to prevent water line freeze up. This cable is ready to install equipped with grounded plug, thermostat and controlled by pilot light. Highlights:- With thermostat. Length : 30' Built in thermostat. Prevents frozen water pipes to -50°f Easy to install just "wrap around" application. Sensor light shows thermostat is working. Ready to install, grounded cord and plug, thermostat controlled, with pilot light. Designed to prevent water line freeze up. ready to install, grounded cord and plug, thermostat controlled with pilot light. Ul and csa approved. Install on pipes, then wrap with pipe insulation.

    • Color: ORANGE
    • Brand: M-D Building Products
    • ASIN: B0006VALDE
    • UPC: 783961040734

  • BriskHeat FFSL2-18 230V SpeedTrace Self-Regulating Heating Cable, 18'

    SpeedTrace Pre-Assembled Self-Regulating Heating Cable - BriskHeat SpeedTrace heating cables are an ideal solution for Ideal for easy to install pipe freeze protection and safe thawing of metal and plastic pipe & valve assemblies. May be used on metal and plastic water pipes, for pipe heating, but not on flexible vinyl tubing, (such as garden hoses). SpeedTrace Heating cable self-regulates the pipe heating cables temperature by automatically adjusting electric cable heat output based on surface and ambient temperatures. Plug-and-Play easy to install pipe heating solution! Automatically adjusts heat output based on surface and ambient temperatures No temperature controller is required. Plug-in ready pre-assembled power cord. Grounded design for added safety. Suitable for extreme cold conditions as low as -40°F (-40°C).Safe for indoor and outdoor use. Safe to overlap heating cable for easy installation. Use with Insul-lock° DS foam insulation for maximum thermal efficiency.

    • Brand: BriskHeat
    • ASIN: B0741BJXBD