• WELLAND 2 X 12 Inch Unfinished Maple Hardwood Flush Mount Floor Vents Louvered Register

    It is designed to lay flat with the surface of the wood flooring, provides two way diffusion and is the preferred style for sand and finish hardwood floors where an architecturally smooth look is desired. Each frame is grooved on the outside to accommodate most 3/4" tongue and groove flooring. It is recommended that this floor register be installed during the installation of your hardwood floor, while the use in traffic area is not recommended.

    • Color: Natural
    • Brand: WELLAND
    • ASIN: B003TNPAQ4

  • Timbermate Maple/Beech/Pine Hardwood Wood Filler 8oz Jar

    A totally unique, quick drying, water based grain filler and wood putty accepts stain beautifully or can be tinted. Never goes bad Easy to apply and clean up No shrinking, cracking or falling out. Does not become permanent until you apply a finish. If youre ever unhappy with the way it looks, the color, etc. - just water it down and remove it. If it freezes, simply put it in the microwave to warm it up or if it dries out, just stir in water. This allows for zero waste! This might just be the perfect wood filler. Manufacturer recommends using only stainless steel or plastic tools to apply because Timbermate may react with low grade steels and turn black. If this happens, simply add water and remove it, or wait for it to dry and sand it off.

    • Brand: Timbermate
    • ASIN: B001NV7GRA

  • WELLAND 4 Inch x 12 Inch Maple Hardwood Vent Floor Register Self Rimming Unfinished

    Brand History WELLAND Wood Vents has been serving American flooring businesses for over 10 years. We offer all most species of floor register in various sizes and ship them directly from US warehouses. Our product lines include flush-mounting vent, self-rimming vent, baseboard diffuser vent, wall vent and cold air return vent. Please visit our Amazon store for all available items. Self rimming vent is designed to lay above on the surface of the wood flooring, provides two-way diffusion and is the preferred style for hardwood floors where an architecturally smooth look is desired. Easy Installation Each frame is grooved on the outside to accommodate most 3/4" tongue flooring. It is recommended that this floor register to be installed during the installation of your hardwood floor, and always avoid high traffic area.

    • Brand: WELLAND
    • ASIN: B003M8XPXG
    • UPC: 814874014328

  • Easy Wood Tools Full Size Easy Rougher Replaceable Carbide Insert Cutter Lathe Wood Turning Tool Gouge Scraper with Maple Hardwood Easy Grip Handle Model #1200

    The Easy Wood Tools Full Size Easy Rougher is a replaceable carbide insert woodturning lathe tool that addresses fatigue, safety, and efficiency like no other type of tool on the market. Designed to be kept flat on the tool rest, level to the floor and pushed straight into your work, the Easy Rougher will effortlessly hog away massive amounts of wood. No intimidating cutting angles to learn and remember-cuts left, right and straight in without changing approach angle. This simple approach to turning allows you to learn and master wood turning in no time. The tool design provides support directly beneath the cutting edge transferring the cutting pressure downward allowing the lathe to \"take the pounding\" that you would normally suffer through when using a conventional bowl gouge for roughing. Requires very little physical strength or exertion, so no more 'white knuckling' a bowl gouge. Truly deeper cuts - up to 1 inch off the diameter in one pass with the Full Size Rougher. Maximum reach from tool rest is 4 inches. Super hard Maple handle is 16 inches long with easy grip handle. Solid CNC machined stainless steel tool bar is 8.5 inches long and 1/2 inch square. Overall tool length is 24.5 inches The Full Size Rougher accepts 3 different proprietary carbide cutters: Ci1-R2 (2 inc...

    • Brand: Easy Wood Tools
    • ASIN: B0039ZYQ4Y
    • UPC: 811269020384

  • 9-5/8" X 10-3/4" Pair of Hand-Carved Maple Hardwood Grape Leaf Scrolls IWW29-XL

    Hand-carved by skilled craftsmen from grade "A" North American solid Hardwoods. These high quality ornamental Scrolls are triple sanded and ready to accept paint or stain. This applique is available in four widths: 3-5/8", 4-7/8", 6-7/8" or 9-5/8" and three wood types: Alder, Red Oak or Hard Maple - the perfect architectural upgrade to any kitchen or den. *Measurements are approximate

    • Color: Maple
    • Brand: GlideRite Hardware
    • ASIN: B009N4AQLC
    • UPC: 849376000388

  • 6-7/8" X 7-1/2" Pair of Hand-Carved Maple Hardwood Grape Leaf Scrolls IWW29-L

    Hand-carved by skilled craftsmen from grade "A" North American solid Hardwoods. These high quality ornamental Scrolls are triple sanded and ready to accept paint or stain. This applique is available in four widths: 3-5/8", 4-7/8", 6-7/8" or 9-5/8" and three wood types: Alder, Red Oak or Hard Maple - the perfect architectural upgrade to any kitchen or den. *Measurements are approximate

    • Color: Maple
    • Brand: GlideRite Hardware
    • ASIN: B009N47JW6
    • UPC: 849376000357

  • Iszy Billiards BND-02-48-19 Short 48" 2Piece Hardwood Maple Pool Cue Billiard Stick 19 Oz, Brown

    Color Brown black - steel joint - 13Mm fiber ferrule - glue on leather tip - 19 ounce cue - irish linen wrap - 48 inches in length

    • Color: Brown White
    • Brand: Iszy Billiards
    • ASIN: B00LUAYFUU
    • UPC: 817824014591

  • Easy Wood Tools 3 Piece Combination Set of Full Size Replaceable Carbide Insert Lathe Turning Tools with Rougher, Finisher and Detailer with Maple Hardwood Handles Models 1200, 4200 and 7500

    This is a 3 piece combination set of Easy Wood Tools Full Size replaceable carbide insert woodturning lathe tools. The set includes the Full Size Rougher, Full Size Finisher and Full Size Detailer. These tools address fatigue, safety, and efficiency like no other lathe tools on the market. Designed to be kept flat on the tool rest, level to the floor and pushed straight into your work, these tools will effortlessly hog away massive amounts of wood. No intimidating cutting angles to learn and remember-cuts left, right and straight in without changing approach angle. This simple approach to turning allows you to learn and master woodturning in no time. All tools have super hard Maple handles that are 16 inches long with easy grip handles. Solid CNC machined stainless steel tool bars are 8.5 inches long and 1/2 inch square. Overall length of these tools is 24.5 inches The Rougher accepts 3 different proprietary carbide cutters: Ci1-R2 (2 inch radius) , Ci1-R4 (4 inch radius) , or the Ci1-SQ (no radius), and comes loaded with a Ci-SQ cutter. The Finisher comes loaded with a round C10 carbide cutter. Detailer comes loaded with a diamond Ci4 cutter. These carbide cutters have multiple sharp sides and are easily rotated to expose new sharp edges. You will never need to stop turning and ...

    • Brand: Easy Wood Tools
    • ASIN: B00FKYEUKC
    • UPC: 632963185175

  • 4-7/8" X 5-3/8" Pair of Hand-Carved Maple Hardwood Grape Leaf Scrolls IWW29-M

    Hand-carved by skilled craftsmen from grade "A" North American solid Hardwoods. These high quality ornamental Scrolls are triple sanded and ready to accept paint or stain. This applique is available in four widths: 3-5/8", 4-7/8", 6-7/8" or 9-5/8" and three wood types: Alder, Red Oak or Hard Maple - the perfect architectural upgrade to any kitchen or den. *Measurements are approximate

    • Color: Maple
    • Brand: GlideRite Hardware
    • ASIN: B009N43HPE
    • UPC: 849376000326