• GM Metric Caliper Fitting, 10mm - 1.5 to -3 AN, Male Adapter Connector

    Made from high-quality steel, these bulkhead adapters from Speedway give you an easy way to connect lines through firewalls or frames.These fittings have AN at one end and 10mm-1.5" on the other end. It can be screwed into a GM metric caliper with 10mm-1.5" threads if you use our crush washers (part number 617-3642). Steel Male Adapter Connector Fitting  AN to IFM all steel adapter10mm - 1.5 to -3 AN Item DetailsAN3 to 10mm-1.5"

    • Brand: Speedway Motors
    • ASIN: B075FCJXFZ

  • NEW SOUTHWEST SPEED REAR DISC BRAKE CALIPER, PAD, AND 1-PIECE HAT & ROTOR SET WITH WELD-ON BRACKETS, D154 GM METRIC CALIPERS FIT MOST 1978 & LATER GM APPLICATIONS, 11.25" X 1" DISCS

    Brand New Southwest Speed Rear Brake Rotor/Hat, Brake Caliper, and Pad Set with Weld-On Caliper Brackets. These kits are designed to put disc brakes on the rear of almost any vehicle with a 3" Diameter rear end housing by welding the caliper brackets on. Complete Kit Includes: D154 GM Metric Brake Caliper Kit (SWS # 203-6188): Includes Semi-metallic, high-friction pads and caliper slide pin bolts with sleeves Cast steel e-brake calipers Directly replace the 1978 and later D154 type stock GM Metric calipers Single stock 2 1/2" piston Fluid inlets are 10mm x 1.5 Floating design Include bleeder screws Weld-on Caliper Brackets (SWS # 203-154 x 2): Designed to weld-on 3" diameter rear end housings *** These same brackets are also availble to weld-on 3 1/4", 3 1/2", and 4" diameter tubes. Just let our team know if you would prefer to change to one of those options *** 1 Piece Brake Rotors (SWS # 203-8574 x 2): Vented, steel, straight-vaned rotor 11.25" Diameter 1.00" Thick Drilled for both 5 x 4 1/2" and 5 x 4 3/4" bolt patterns Measurements from Diagram: (Shown in the images) Rotor Diameter: 11.25" Rotor Width: 1.00" Offset: 1.314" Center Hole Diameter: 2.780" Clearance I.D.: 6.250" Face Thickness: 0.236" Stud Bolt Circle: 5 x 4.5" and 5 x 4.75" Rotors weigh approximately...

    • Color: 203-8574_6188_154
    • Brand: Southwest Speed
    • ASIN: B01N3M7Y9H

  • Weld-On 1978-88 GM Metric Caliper Bracket

    Mounts 1978-1988 GM front caliper to any 3" tube rear end using 11-3/4" diameter rotors. Fully machined steel with punched lightening holes. Measures approximately 5-1/2" between mounting holes. IMCA APPROVED

    • Brand: Speedway Motors
    • ASIN: B0766614XF

  • AFCO RACING PRODUCTS GM Metric Calipers C1 Compound Brake Pads P/N 1251-2154

    AFCO RACING PRODUCTS 1251-2154 C2 Brake Pads GM Metric. Dimensions in Inches (LxWxH): 8.8 x 8.8 x 3.2

    • Brand: Afco Racing Products
    • ASIN: B00TO4TSRO
    • UPC: 191215040902

  • NEW WILWOOD BLACK D154 GM METRIC BRAKE CALIPERS & PADS, FRONT, 2 PISTONS, FOR 1.04" ROTORS

    Brand New Wilwood D-154 Brake Caliper Set (Part #140-12099-BK) for Both Front Wheels. • Features Powder Coated Black Calipers. Wilwood brake kits consist of specifically engineered & matched groups of components designed to provide superior brake system performance & custom appeal over a wide range of applications. Wilwood's D154 Front Caliper Kit is a direct bolt-on 2 piston, lightweight, high-strength, extreme duty alternative to the OE cast iron "Metric" calipers that were used on a wide range of factory disc brake equipped mid-size GM cars and small trucks beginning in 1978. Use of this caliper can still be found on some GM models as late as the year 2002. Forged billet aluminum bodies, stainless steel pistons, and competition style high-temperature seals put an end to the rust, bore pitting, and seal failures that plague the OE caliper design. D154 calipers provide low-maintenance performance and a huge weight savings with high temperature reliability for the street and track. D154 calipers mount in the stock location over stock rotors; use the original style OE D154 brake pads and an OE M10mm x 1.5 banjo bolt brake line mounting. D154 Calipers can be used with most wheels that clear the OE calipers. The two 1.62" pistons in each caliper provide 4.12 square inches of pi...

    • Color: Black
    • Brand: Southwest Speed
    • ASIN: B00OZ8SBC2

  • Metric Brake Caliper Bracket Small GM Ford 9" IMCA UMP Bryke Racing

    Metric Caliper Bracket Weld On Fits small GM Metric Calipers Example: '85 Monte Carlo 7/16 Fine Thread Fits 3" Axle Tube 5-1/2" Bolt Spacing

    • Color: See Description
    • Brand: Bryke Racing
    • ASIN: B004FS1Q3I

  • Mustang II Flat Steel Caliper Brackets for GM Metric Calipers

    DescriptionThese mustang II Caliper Bracket Set is custom designed to fit GM style big bore piston calipers with 11 rotors. For use in racing and street rod applications, these Mustang II caliper brackets have raised spacers on both ends and are designed to accommodate vehicles equipped with GM Metric caliper conversion from standard 9.5 to 11 brake kits with 5 x 4.5 wheel lug pattern (1978-1988 RWD passenger cars and light duty trucks). Crafted from high grade steel and zinc iridite coated for corrosion and rust resistance, these caliper brackets look great and are stronger and more durable than ever before. From the heaviest of vehicles to street rod racing applications alike, these caliper brackets are precision engineered for an accurate fit every time.

    • Brand: DEMOTOR
    • ASIN: B01461Y2J8

  • Wilwood 120-13900 Race Caliper (GM Metric 2.50 / 1.040)

    The product is a GM Metric Race Caliper 2.50 / 1.040. Easy to install and recommended accessories for your vehicles. Manufactured in the United States.

    • Brand: Wilwood
    • ASIN: B010U5TB6S
    • UPC: 889545070071

  • BSB Manufacturing 7006 Caliper Bracket GM Metric

    BSB MANUFACTURING Caliper Bracket GMMetric

    • Brand: BSB Manufacturing
    • ASIN: B005JV8HSM