• Edelbrock 2701 Performer Intake Manifold

    The Edelbrock Performer Intake Manifold delivers superior performance with square-bore carburetors. Horsepower gains from idle to 5,500 RPM, when used with Performer Series square-bore or Thunder Series AVS carburetors. Dyno tests show that the power gains an extra 5 horsepower, 9 foot / pounds and torque across the entire RPM range over their own performer manifolds.

    • Brand: Edelbrock
    • ASIN: B00063046Q
    • UPC: 085347027019

  • Edelbrock 7501 Performer RPM Air-Gap Intake Manifold

    The Edelbrock Performer RPM Air-Gap Intake Manifold is manufactured from aluminum and given a natural finish. The exclusive Air-Gap design features an open space between the intake runners and the hot engine oil resulting in a cooler, denser charge and more power. The runners are tuned up to move the power band 1,000 RPM higher than Performer Air-Gap manifolds, from idle-5,500 RPM up to 1,500-6,500 RPM. It also features nitrous bosses, rear water outlets and two distributor clamp locations.

    • Brand: Edelbrock
    • ASIN: B000CN9164
    • UPC: 085347075010

  • Edelbrock 27014 Performer EPS EnduraShine Aluminum Intake Manifold

    The Edelbrock Performer EPS Intake Manifold features a low-rise, dual plane design with patented runner tuning and a 180 degree firing order. This combination boosts torque over a wide RPM range from idle to 5,500 RPM. They deliver improved throttle response over stock intake and come in non-EGR (Exhaust Gas Recirculation) style.

    • Brand: Edelbrock
    • ASIN: B000CN516I
    • UPC: 085347270149

  • Edelbrock 2040 Performer EPS Intake Manifold Installation Kit Inc. Intake Manifold PN[2701]/Intake Gasket PN[7201]/Intake Bolt Kit PN[8504]/Carb Stud Kit PN[8008]/Carb Base Gasket/RTV Sealant Performer EPS Intake Manifold Installation Kit

    We have packaged all necessary components to replace your stock iron intake manifold. These kits include an Edelborck aluminum intake manifold, intake gasket set, carburetor base gasket, RTV sealant, intake bolts and carburetor studs for an all-in-one-box installation for your street rod or muscle car. Get better performance from a simple manifold replacement kit.

    • Brand: Edelbrock
    • ASIN: B00919JE2Q
    • UPC: 085347020409

  • Edelbrock 27013 Intake Manifold

    Designed for 1986 and earlier 262-400 cubic-inch Chevys, the Performer EPS dual-plane intake manifold is optimized to deliver superior performance with Edelbrock square-bore Performer Series or Thunder Series AVS carburetors. This small-block Chevy manifold has a runner design that's "tuned" for peak torque at 3500 rpm on a 350-inch engine and it's ideal for power from off-idle to 5500 rpm. Dyno tests showed gains of 5 hp and 9 ft-lbs. of torque over the Edelbrock Performer manifold #2101 on a 350 Chevy. From 3000 to 4500 rpm, the increases averaged 5+ ft-lbs. of torque for more performance where you need it most. Performer EPS manifold #2703 combines a modern runner design with a front mounted oil fill tube for those who want the vintage look of our Classic valve covers with no breathers. #2703 has the same performance features as the Performer EPS #2701. Includes Oil Fill Tube (not installed) and matching push-in breather cap. The Oil Fill Tube and Breather are also available separately as #4803. Match with a dependable Edelbrock square-bore carburetor for maximum performance gains. Also available with choice of four finishes. Will not fit under stock Corvette hood. ** Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 500-650 cfm. Installation N...

    • Brand: Edelbrock
    • ASIN: B004OSO4J2
    • UPC: 085347270132

  • Edelbrock 2104 Performer Intake Manifold

    The Edelbrock Performer Intake Manifold features a low-rise, dual plane design with patented runner tuning and a 180 degree firing order. This combination boosts torque over a wide RPM range from idle to 5,500 RPM. They deliver improved throttle response over stock intake and come in non-EGR (Exhaust Gas Recirculation) style.

    • Brand: Edelbrock
    • ASIN: B000CN50K0
    • UPC: 085347021048

  • Edelbrock 2975 Victor Jr. Intake Manifold

    The Edelbrock Victor Jr. Intake Manifold is a versatile manifold that is excellent for many applications from high performance street to drag strip or circle track racing. It's power ranges from 3,500 rpm to 8,000 rpm, and they provide maximum performance for engines with standard port locations with iron or aluminum cylinder heads. The height of this manifold is 4.58" tall with port dimensions of 1.90" tall by 1.10" wide. It does not have any EGR provisions, and is street legal for pre-emissions equipped engines and vehicles. It has been cast so that there is excess mass in appropriate places for port matching and customizing.

    • Brand: Edelbrock
    • ASIN: B00062YUUI
    • UPC: 085347029754

  • Edelbrock 8504 Intake Manifold Bolt Kit

    The Edelbrock Intake Manifold Bolt Kits are designed specifically to work with the Edelbrock manifolds, including the Performer, Performer RPM and Torker Series. They are provided with a cadmium finish steel bolt and hardened washer kits that contain all bolts and washers needed for manifold installation. The reduced-hex heads are for easy wrench access.

    • Brand: Edelbrock
    • ASIN: B000CN925Y
    • UPC: 085347085040

  • Edelbrock 2021 Single-Quad Manifold And Carb Kit For Performer EPS Manifold w/Performer Series 600cfm Carb Incl. Carb/Fuel Line/Intake Bolts/Gaskets Satin Finish Single-Quad Manifold And Carb Kit

    With a Manifold and Carb Kit, its easy to upgrade your induction system with the best combination of Edelbrock proven performance and looks in a single box.

    • Brand: Edelbrock
    • ASIN: B00840ZSPU
    • UPC: 085347020218