• Dive Rite Lift Bag {75 lb | 34 kg} w/Built-In Sleeve

    The Dive Rite {75 lb | 34 kg} Lift Bag is a traditional lift bag featuring an open design, internal dump valve and built-in carrying sleeve. The Dive Rite {75 lb | 34 kg} Lift Bag is a square-ish shape that is (28.5 in | 72.3 cm} tall by {22.5 in | 57.1 cm} wide and has a handle at the top and reflective tape on both sides. As a true lift bag, it contains an internal dump valve with pull cord that is used by the diver ascending with the bag to control ascent rate. The open design allows air to vent out the bottom in a rapid ascent. The shape allows for more lift at the top of the bag while still maintaining a lower profile. Available in safety orange color, the Dive Rite {75 lb | 34 kg} Lift Bag includes its own built-in mesh carrying sleeve. Features: -75 lbs of lift -1000 denier cordura laminated with 5 mil of urethane -RF welded seams -Marine-grade stainless steel grommets

    • Brand: Dive Rite
    • ASIN: B00I9R22B6
    • UPC: 648609799347

  • Dive Rite XT2 Second Stage 40" Hose, Yellow

    The XT2 Regulator welcomes a new generation of regulator performance at Dive Rite. An Elite Performer, the XT2's advanced, Patented Design earns top marks from Mike Ward of Dive Lab. With work of breathing at less than 1.0 J/l, the XT2 performs right alongside premier regulators on the market today. The Second-Stage Regulator ha an Ergonomic Dive/Pre-Dive Venturi Lever that is Easy-to-Adjust even with thick gloves. The Venturi Lever prevents Regulator Free-Flow. Second-Stage uses a Pneumatically Balanced Downstream Valve, which provides better performance at depth. The Second Stage has an External Adjustment Valve to Fine-Tune Inhalation Effort. The Second-Stage Housing and Cover are manufactured from Durable Impact Resistant ABS Plastic with Chromed Brass Adjustment Knob and barrel Tube. The Spring-and-Lever are Stainless Steel and the Second-stage comes standard with Teflon Coated Internal Parts, which makes it cold-water ready. The Second-Stage Regulator is available in a Right Hand Configuration has a Bright Yellow Cover for Easy Identification and comes with a 40" (101.6 cm) 3/8" Threaded Low Pressure Hose. The XT2 Second-Stage is Nitrox Ready and is covered by a Limited Lifetime Warranty.

    • Brand: Dive Rite
    • ASIN: B00BYKY4WU

  • Dive Rite Surface Marking Tube w/Built-in Sleeve {5 ft | 1.5 m}

    When surface visibility from a distance is important, such as when the diver is hanging under a bag during deco, many divers choose the Dive Rite Surface Marking Tube. Similar in operation to a lift bag, but tube-shaped, the Surface Marking Tube is approximately { 5 ft | 1.5 m } tall by { 8 in | 20.3 cm } wide (when flat) with an over pressure relief valve (OPV) and has reflective tape at the top end. The Dive Rite Surface Marking Tube is a hybrid that can be used two different ways: The hybrid marking tube is open at the bottom as with the lift bag and incorporates an ingenious funnel-shaped internal baffle that allows the tube to be inflated as usual with a regulator second stage at depth, but prevents the tube from unintentionally deflating should it fall over while on the surface. The hybrid marking tube also has an oral/power inflator that allows the tube to be inflated at the surface (like a "safety sausage") or at depth. Perfect for rebreather divers, using the oral/power inflator with the low pressure hose on a bailout bottle makes inflation manageable without the use of diluent gas. The hybrid marking tube includes an over pressure valve to allow excess gas to vent during ascent and/or to deflate the bag before boarding the boat. Available only in ANSI safety orange, the...

    • Color: Orange
    • Brand: Dive Rite
    • ASIN: B0037Z4RWW
    • UPC: 879642007773

  • Dive Rite Travel EXP Wing ({25 lb | 11.3 kg} Lift) w/Plain Elbow & 12-in Hose

    The Travel EXP is part of our innovative line of 360 degree, donut-style wings that provide greater stability and control in the water. Now made of tough, 1680 ballistic nylon with a new oval shape, the Travel EXP is a lightweight, small-profile wing that is great for travel and warm-water, single tank diving. The donut-style provides an even volume of inflation on top, sides and bottom, which improves buoyancy control and promotes a more efficient, horizontal trim. At 25lbs/11.3kg* of lift, the Travel EXP can accommodate one 80ft3/12 L tank with additional weight in pockets or a weight belt not to exceed 16lbs. As a part of our modular BCD system, it can be matched with either a TransPac, Transplate or any metal backplate and webbing harness. Available in black with gray side panels. Made in the U.S.A.

    • Brand: Dive Rite
    • ASIN: B009EIB1QQ
    • UPC: 879642003409

  • Dive Rite Nomad LS System

    The next evolution in Nomad Sidemount has come with the introduction of the Nomad LS Sidemount System. The Nomad LS builds on its "L" series predecessors to be the most streamline and capable system in the family. The extremely durable exterior SuperFabricTM material is resistant to the elements of diving, whether diving on a quiet reef, pushing deep into a cave system, or scooting through a deck opening on a wreck dive. With the inflator and exhaust valves placed at the front/inside of the wing and not on the exterior, the valves are safe and free from exposure. With 35 lbs (15.8 kg) of lift and a low profile design, the Nomad LS performs in all levels of sidemount diving. With additional lift typically needed toward the lower back when sidemounting, the combination of its diamond shape and contour of the bladder create this lift achieving the optimum trim. A unique zero lift baffle at the top of the wing allows for air travel to the top dump, but prevents an air bubble from forming. A deluxe-style webbing harness using pivot rings on the shoulders provides a comfortable and customizable fit for nearly any size diver. The SuperFabricTM shoulder strap pads provide added durability from abrasions along with a channel on the left shoulder strap for the exhaust valve's pull dump cor...

    • Brand: Dive Rite
    • ASIN: B01LYIKMIL

  • DIN to Yoke Adapter

    Change any DIN regulator to a yoke-style with this small, spin-on adapter. Simply turn the DIN to Yoke Adapter onto the regulators DIN fitting and place the yoke over the standard valve. Carry this item with you when traveling to connect your DIN regulator to any resort cylinder. Sturdy hand wheel is easy to operate.

    • Brand: Dive Rite
    • ASIN: B001P2HHBW

  • Dive Rite Derlin Plastic Balanced Relief Valve for Scuba Drysuits

    Newly designed in 2012, our Balance Relief Valve is avcritical accessory for any drysuit diver, especially on long dives. Without a relief valve, divers tend to intentionally dehydrated themselves to avoid the "urge" during an extended bottom time dive. Hydration is critical to avoid decompression sickness and with our Balanced Relief Valve proper hydration is no longer a concern. Machined from Delrin, it is light weight so it will not add stress to drysuit material and it is corrosion resistant. The Relief Valve is equipped with a one-way valve so that the tubing is equalized with the air pressure inside the drysuit, which prevents the tubing from becoming crushed and stopping flow. Made in the U.S.A.

    • Brand: Dive Rite
    • ASIN: B001O7C50Q

  • Dive Rite Relief Valve - Installation Tool

    Dive Rite Relief Valve installation tool to assist in quick and easy installation of your Dive Rite Relief Valve into your dry suit setup.

    • Brand: Dive Rite
    • ASIN: B00NN4HPWQ

  • Over Pressure Valve - 25" Cord Top Pull

    Allows the diver to move the inflator hose to the lower port and create the OPV dump over the shoulder.

    • ASIN: B00I9R8HQU
    • UPC: 687965613775