• McIgIcM Digital Voltmeter Led,Red and Blue Digital Voltmeter Ammeter Dual Display Voltage DC 0-100V 10ADetector Current Meter Panel Amp Volt Gauge 0.28"

    Features: Operating voltage:DC 4.5 - 30V Measure voltage: DC 0 - 100V Minimum resolution(V): 0.1V Measure current :10A (measure directly,built-in shunt) Minimum resolution(A): 0.01A Operating current:

    • Color: Red,blue
    • Brand: McIgIcM
    • ASIN: B06XR2XKNT
    • UPC: 724190025246

  • Eversame USB Digital Power Meter Tester Multimeter Current and Voltage Monitor, DC 5.1A 30V Amp Voltage Power Meter, Test Speed of Chargers, Cables, Capacity of Power Banks-Black

    Eversame Power Meter Tester -Each Power Meter tester from Eversame will be strictly tested by our QC Department, to prove the importance we set on quality. -Perfect for evaluating whether or not the computer, USB wall charger, USB car charger are outputting acceptable voltage and current range for the device you are connecting -This Power Meter Tester can plugs directly into any USB socket or cable, which displays on the screen the voltage, current and capacity -It provides you a rough estimate of the capacity of the device you are charging Specification Input Voltage: 3V-30V Input Current: 0-5.1A Accuracy: +/- 1% Display: LED, show voltage and current simultaneously Maximum Capacity Value: 99999 mAh Tester three dimensional size: 60*24*14mm Operation Introduction (1). The short press is the interface switch, and long press is battery capacity and other data reset; (2). In the main interface, five-press is the setting of automatic power outages and timing turn-off(Five-press in the main interface, the character in the lower right corner of the display stars flashing, choose three settings of 'AO.. / OFF / 1-24H' by clicking or double-clicking, and when the flashing stops, it means the system saves the current settings automatically); (3). Six-press is Chinese/English interface...

    • Color: Black
    • Brand: Eversame
    • ASIN: B01D9Y6ZFW
    • UPC: 600978578213

  • bayite DC 5-120V 100A Mini Digital Current Voltage Amp Meter Ammeter Gauge with Hall Effect Sensor Transformer

    bayite Hall effect current meter reads current by detecting the magnetic field around the wire, there is no electrical contact which eliminate risk to delicate monitoring equipment and also minimizes safety concerns. The sensor doesn't get hot like the current shunt sense resistor which can have thermal temperature heat dissipation issues. Three display modes: 1, alternately display Amps and Voltage 2, only display Amps 3, only display Voltage Specifications: Measurement Range: + -100A Accuracy: + - 1% Resolution: 0.3A Working current: 7-15mA Power supply: DC 5-120V Product Dimensions: 48mm*29mm*23mm Mounting hole: 45.5mm*25.5mm Sensor hole diameter: 19mm Operating temperature: -4°F - 140°F (-20°C - 60°C) As the resolution is 0.3A, the current reading might be flickering with 0.3A difference. For example, if the current is 1.7A, you might see a 1.7A and 2.0A alternatively. This is normal. If your signal is too weak or you are not getting the resolution you want, you can coil the wire through the current sensor as many times as you want to double, triple, or quadruple the sensitivity or resolution.For example, if your current signal is only 0.2 Amps, you could loop the wire through the sensor 10 times and the signal would by 10X stronger and would appear as 2.0 Amps.

    • Brand: bayite
    • ASIN: B01DDQM6Z4

  • DerrySun Digital Clamp Meter Auto-Ranging Multimeters AC/DC Voltmeter AC Amp Meter Voltage Tester with AC Current/Volt/Ohm/Diode and Resistance Test Hand Tools for Home Electronic DIY Use

    DerrySun 2000 Counts Digital Clamp Multimeters for Home and DIY Electronic Testing and Measuring! This Electrical Scanners performs AC/DC Voltage, AC Current, Resistance, Audible Continuity, Diode measurements, It is a 3 1/2 digits, 2000 counts auto ranging digital clamp meter. It has the functions of polarity indication, data hold, maximum value hold, over range indication and automatic power-off. It can be operated easily and is an ideal DIY hand tool. Features ✔The meter can measure AC/DC Voltage, AC Current, Resistance, Audible Continuity, Diode,temperature ✔Dual measurement models,you can choose the manual range or auto range, so it is an ideal tool for professional user and newer ✔Reading hold keeps the value locked in the screen ✔The buzzer can indicate the situation during the continuity test ✔Auto power off when it is idle for 15 mins to save battery energy Technical Characteristics ●DC voltage: 200m-2-20-200-600V ±1.0% ●AC voltage: 200m-2-20-200-600V ±1.2% ●DC current: 2-20-200-400A ±2.0% ●Resistance: 200-2k-20k-200k-2M-20MΩ ±1.0% Specification ●LCD display size: 36x19mm ●LCD display value: 1999 ●Auto-ranging: yes ●Low voltage display: Yes ●Temperature measuring: Yes ●Overload protection: Yes ●Diode Test: Yes ( shows approximate pres...

    • Color: Red-DT202C
    • Brand: DerrySun
    • ASIN: B07CWTLF7H
    • UPC: 657390921899

  • AIMO MS2108A Auto Range Digital Clamp Meter 400 AC DC Current Hz Tester

    Features: Perform measurements of AC/DC voltage and current, resistance, frequency, duty, capacitance, as well as continuity and diode test. Display: 4000 counts with analog bar LCD display. Maximum voltage between terminals and earth ground: DC 1000V or AC 750V. Over range protection for all ranges. Reading hold function. Square value measuring function. (at AC A and AC V range) Maximum & minimum value measuring function. Converte rate: 3 times/sec. Bar graph: 30 times/sec. Auto power off. Continuity test. Diode test. MAX. diameter for conductor: Ф26mm. Secondary injection molding case. Conform to the IEC1010-1 & IEC1010-1-032 standards. Specifications: Model: MS2108A Double Insulation Protection class CAT III 600V and pollution degree 2 Display: 4000 counts DC Voltage Accuracy 400mV / 4V / 40V / 400V / 1000V ± 0.8% AC Voltage Accuracy 4V / 40V / 400V / 750V ± 1.0% DC Current Accuracy 40A / 400A ± 2% AC Current Accuracy 40A / 400A ± 2% Resistance Accuracy 400Ω / 4kΩ / 40kΩ / 400kΩ ± 0.8%, 4MΩ / 40MΩ ± 1.2% Capacitance 40nF / 400nF / 4μF / 40μF / 400μF / 4000μF ± 4% Frequency Accuracy 10Hz / 100Hz / 1KHz / 10kHz / 100kHz / 1MHz / 10MHz ± 1%, 10 ~10KHz ± 2% Duty Cycle: 0.1% ~ 99.9% ± 3% Operating Temperature: 0℃ ~ 40℃ (32°F ~ 104°F) Storage Temperture: ...

    • Color: Green
    • Brand: Aimo
    • ASIN: B00SQ4UETO
    • UPC: 705554037099

  • Multimeter, Tacklife CM01A Clamp Meter 4000 Counts Auto-Ranging Digital Tester with NCV, AC/DC Voltage, Current, Ohm, Continuity Electrical Tester, Diode, Resistance,Capacitance Meters

    Tacklife CM01A Digital Clamp Meter is a portable, handheld professional meter has everything you need for a full multimeter. It is designed according to IEC1010-1,IEC1010-2-030 and IEC1010-2-032 concerning safety requirements. This clamp meter can be used to troubleshoot electrical problems safely and accurately in a wide array of industrial and household devices. (such as electronic equipment, automotive, domestic appliances, power supplies, and wiring systems. ) Tacklfie CM01A has the power to get the job done faster, safer, and easier. - Jaw opening measures AC current in a conductor up to 26mm without interrupting the circuit - NCV function to detect AC voltage, get rid of risk of electric shock- Use the PTC protection circuit for Resistance - Features Data Hold, Max Reading and an easy-to-read large LCD - The operator can access measurement result in a dark place with the flashlight. - The clamp multimeter includes a lightweight portable carry pouch for easy storage and handling. - The multimeter also includes safely insulated test probes with plastic gripping for safer handling while measuring. Specification: • DC Voltage Range and Accuracy: 400mV/4V/40V/400V ±(0.8%+2), 600V ±(1.0%+2) • AC Voltage Range and Accuracy: 4V/40V/400V/600V ±(1.2%+10) • DC Current Ra...

    • Color: Tacklife Digital Clamp Meter (CM01A)
    • Brand: TACKLIFE
    • ASIN: B01N014USE
    • UPC: 709202782034

  • DROK 0.28" Digital LED Voltmeter Ammeter Multimeter DC 4.5-30V 100A Voltage Current Meter Panel Gauge 12V/24V Volt Amp Tester

    Parameters: Power Supply (Measure Voltage): DC 4.5-30V voltage < 10V, resolution: 0.01V voltage >= 10V, resolution: 0.1V Measure Current: 0-100A forward current (require external 100A shunt) Current Resolution: 0.1A Operating Current:

    • Brand: DROK
    • UPC: 519397033831

  • DROK USB 2.0 Digital Multimeter, Ammeter Voltmeter Capacitance & Watt Meter, 7 Modes Multi Tester, DC 3A 12V Amp Voltage Power Meter, Charging System Tester, Fast Charging and Data Sync Dual USB Ports

    Is your mobile device not charging properly, and you suspect the new charger that you bought recently?Do you want to check If your solar charger is giving proper current for your mobile device?Specification:✓ Input voltage : 3.20 - 15.0V✓ Resolution: 0.01V (/=10V)✓ Measuring current: 0.00 -3.00a (10a max, but cannot work in 10a for long time)✓ Resolution: 0.01A✓ Capacitance measurement: 0-99999 MA/H✓ Capacitance accumulation: Yes✓ Power testing: 0.00-9.99-99.9W✓ Over-voltage alarm: when voltage >/=5.6V, voltage digital point will Flash quickly✓ Lacking-voltage alarm✓ Over-current alarm : when current >/=3A, current digital point will Flash quickly✓ Short-circuit alarm: current digital point will Flash quickly dual USB output✓  Output I (dual function - device charging and data transfer)The charging current, in this case, is determined by compatibility. you can view the voltage and current values at the same time.✓  Output II (device charging only)The built-in intelligent charging control IC matches the most appropriate and safest current for your devices automatically. It is used mainly for non-original chargers, but it is suitable for original chargers as well. This universal USB gadget is suitable for most of the mobile phones, mobile power, tablet P...

    • Color: black, red, blue
    • Brand: DROK
    • ASIN: B00J3JSEG6
    • UPC: 519397043823

  • DROK 100174 Digital Multimeter Dual LED Display Voltmeter DC 4.5V to 30V Ammeter 0 to 50A Voltage Current Meter Volt Amp Panel Monitor for Auto Car Motor

    Features: Dual LED: Red voltage, Blue current, Display Voltage Current at same time This panel meter is common ground design, it means that the (measure ground wire) and (power supply ground) is common ground. Power Supply DC 4.5-30V. With reverse polarity protection, but the max power supply can not exceed 30VDC. Specific: Power Supply (Measure Voltage): DC 4.5-30V voltage < 10V, resolution: 0.01V voltage >= 10V, resolution: 0.1V Measure Current: 0-50A forward current (need an extra 50A shunt for measuring current) Current Resolution: 0.1A Operating Current:

    • Brand: DROK
    • UPC: 519397033800