• PT Coupling Basic Standard Series 20A Aluminum Cam and Groove Hose Fitting, A-Adapter, 2" Adapter x NPT Female

    This PT Coupling Type A adapter has an aluminum body and a female National Pipe Taper (NPT) threaded connection for adapting NPT thread to a male cam and groove-style fitting. The aluminum body resists corrosion and abrasion, is light weight, and is suitable for use with water, hydraulic oil, coolants, gasoline, and petroleum products. This cam and groove adapter complies with Commercial Item Description A-A-59326D for quick disconnect fittings and is used in applications such as fuel delivery, wine transfer, and grain movement.Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems. They are made of brass, stainless steel, galvanized steel, and other materials that resist corrosion, pressure, and wear. Hose fittings have various types of connections, including threaded, barbed, push-to-connect, dry disconnect, and others including those based on internationally-accepted specifications. Hose fittings are used in systems such as air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation.PT Coupling manufactures pneumatic and hydraulic hose fittings for industrial and automotive applications. The company, fo...

    • Brand: PT Coupling
    • ASIN: B0094MF70I

  • Lovejoy 25309 Size L-AL 075 Open Center Type Jaw Coupling Elastomer, Hytrel, 3/4" Open Center, 1.75" OD, 0.44" Length, 227 in-lbs Nominal Torque

    This Lovejoy open center type jaw coupling elastomer replaces open center elastomers on Lovejoy jaw style flexible coupling assemblies and is made of thermoplastic polyester elastomer (Hytrel) for strength, flexibility and heat resistance. The open center design allows for the shafts of the driver and driven to be positioned within a short distance of each other but has a lower RPM capacity than solid center elastomers. It can operate in temperatures ranging from -60 to 250 degrees F (-51 to 121 degrees C). Lovejoy jaw style couplings are a type of flexible coupling suitable for use in various industrial power transmission applications such as compressors, blowers, pumps, conveyors, mixers, and gear boxes, among others. Flexible couplings are used to link two rotating shafts that are not aligned in order to transmit the rotational power, known as torque, from one shaft to the other. Most flexible couplings consist of two hubs and a middle assembly; each hub attaches to a shaft while the middle assembly flexes between the hubs to accommodate the misalignment of the two shafts. Shaft misalignments are generally either parallel or angular and cause complications to transmitting rotational power from one shaft to another in the form of stresses, loads, vibrations, and other forces, ...

    • Brand: Lovejoy
    • ASIN: B003HIX2GG
    • UPC: 685144253095

  • Dremel 2615294309 Rotary Tool Flexible Coupling

    Genuine Original Equipment Manufacturer (OEM) parts! This manufacturer-approved flexible coupling (part number 2615294309) is for rotary tools. Flexible coupling 2615294309 connects the motor shaft to the output shaft assembly. Unplug the rotary tool before starting the repair. Wear work gloves to protect your hands. For Dremel.

    • Brand: Dremel
    • ASIN: B00C1KD7I4
    • UPC: 704660012211

  • Banjo 150D Polypropylene Cam & Groove Fitting, 1-1/2" Female Coupler x NPT Female

    ' Coupler, Body Material Polypropylene, Coupling Type D, Connection Type Female Coupler x FNPT, Coupler Size 1-1/2 In., Pipe Size 1-1/2 In., Max. Pressure 125 psi, Gasket Material EPDM, Standards MS27019 '

    • Brand: BANJO
    • ASIN: B001GLWM4O
    • UPC: 791206028188

  • Dixon MC3094 Galvanized Steel Type B Shank/Water Quick-Connect Fitting, Coupler, 4" Male Coupling x 4" Hose ID Barbed

    This Dixon MC30 series hot-dipped galvanized steel quick connect Bauer-style (Type B) shank/water quick connect male coupler has a barbed hose ID end, valveless construction, and connects to a female Bauer style (Type B) coupler. The barbed hose ID connection fits inside the hose, has a greater hold than non-barbed connections. The coupler's hot-dipped galvanized steel body resists rust and corrosion. This coupler locks on the male side with a double pin locking lever and comes with a safety pin to prevent the fitting from being accidentally opened. It is used for irrigation and suction line applications, among others, but it is not recommended for use with media that would cause health or environmental concerns if the fitting leaked.SpecificationsFitting-end connectionMale couplerHose-end connectionID barbed hoseMaterialGalvanized steelHose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems. They are made of brass, stainless steel, galvanized steel, and other materials that resist corrosion, pressure, and wear. Hose fittings have various types of connections, including threaded, barbed, push-to-connect, dry disconnect, and others including those based on internationally-accepted specifications. Hose fittings are used in systems ...

    • Brand: Dixon Valve & Coupling
    • ASIN: B00835SB7S

  • ProMaker Stainless Steel Carbonation Cap Counter Pressure Bottle Filling with 5/16" Barb Ball Lock Type CO2 Coupling Carbonate Soda Beer Fruit Juice Water (1 Pcs)

    Material:304 stainless steel Weight´╝Ü3.5-3.6oz Include: 1 piece of carbonation cap 4 piece of o-ring for replacement The post on this unique carbonation cap has been machined ,so it fit BOTH the liquid and gas ball lock disconnects. For best results, make sure that your beverage is very cold so that the CO2 can be absorbed much faster

    • Color: Silver
    • Brand: ProMaker
    • ASIN: B07C28M1QR
    • UPC: 742354609576

  • Pro Flow 1/2" Type E Adapter 304 Stainless Steel

    1/2" Type E Adapter - 304 Stainless Steel Cam and Groove Male Adapter x Hose Shank

    • Brand: Snap Lock
    • ASIN: B00GGQV326

  • Coupling Type

    • ASIN: B07FFHPRNP

  • Dixon G200-D-AL Aluminum A380 Global Type D Cam and Groove Hose Fitting, 2" Socket x 2" NPT Female

    The Dixon global Type D aluminum A380 cam and groove fitting has a straight body with two openings for connecting two hoses or pipes with cam and groove fittings or threads. It has one female cam coupler end for connecting to male groove adapters and one NPT female threaded end for connecting to an NPT male threaded connection (Type D). The body is made of aluminum for corrosion and tarnish resistance, and it has cam lock levers for locking the fitting's male groove adapter into female cam couplers. A nitrile butadiene rubber (Buna-N) seal provides a leak-tight fit that is rated for petroleum service, ethanol to E100, and biodiesel to B20. This Dixon cam and groove fitting is suitable for use in commercial or industrial flow systems, such as water transport and treatment, waste management, and in petroleum systems, among others, but it should not be used in compressed air or steam applications.Hose fittings are components used for connecting, terminating, controlling, and changing the direction of flow in piping and hose systems in many different industries. When purchasing hose fittings, consider the application, as this will affect material type, shape, size and required durability. Fittings are available threaded, unthreaded, or using another connection standard, such as cam a...

    • Brand: Dixon Valve & Coupling
    • ASIN: B007YZGX82