• Earth Science Pristine Blue (64 oz)

    Pristine Blue is the heart of the Pristine Blue non-chlorine pool and spa system. When using Pristine Blue you can swim immediately after application. This product is used to control algae and bacteria in residential swimming pools and hot tubs. Best of all Pristine Blue is environmentally friendly, and EPA registered as an algaecide/bactericide (Nonpublic Health Bacteria). Product Dosage Swimming Pool Start Up: 2 ounces per 1,000 gallons of water. Hot Tub Start Up: 6 milliliters per 100 gallons. These dosages will yield a rate of 0.9 ppm metallic copper. Pristine Blue levels should be checked every 2 weeks. Directions To control algae and nonpublic health bacteria and bacteria that cause odor problems in residential swimming pool, spas and hot tubs: For Pools: Apply at a rate of 2 fluid ounces of Pristine Blue per 1,000 gallons of water (20 fluid ounces per 10,000 gallons) For Spas and Hot Tubs: Apply at a rate of 6 milliliters of Pristine Blue per 100 gallons of water using supplied measuring cup. These dosages will yield a rate of 0.9 ppm metallic copper. Every 14 Days: Test the copper level using a standard commercial swimming pool copper test kit. Add Pristine Blue to raise level back to 0.9 ppm. The amount of Pristine Blue to be added is proportional to the starting concent...

    • Brand: Earth Science
    • ASIN: B00EDZ17NM
    • UPC: 761558122285

  • LaMotte FAS-DPD Commercial 7 Liquid Pool Spa Chemical Water Testing Kit | 7022

    With the LaMotte 7022 FAS-DPD Commercial 7 swimming pool test kit, the pool analyst can measure Free and Total Chlorine levels in 0.2 or 0.5 ppm increments over a wide range by adding Chlorine Titrant that creates a clear endpoint color reaction. The Bromine test is measured by multiplying the Free Chlorine results by 2.25. The pH test is measured by adding just 5 drops of pH indicator to a 10 mL test tube then comparing the color to a pH Octa-Slide color bar with measurements from 6.8 to 8.2 in 0.2 pH increments. Along with the pH test Acid and Base Demand tests are included with tables to help adjust pH to the ideal range. The Alkalinity test employs a simple drop count method with 1 drop equal to 10 ppm once a red endpoint color change occurs. The Calcium Hardness test is a drop count method with 1 drop equal to 20 ppm at a blue endpoint color change. The Cyanuric Acid test uses a rapid dissolving tablet that develops a cloudy precipitate with results measured by the disappearing dot method. The kit includes the Pool Manager Water Quality Handbook, which has information on water balance, sanitizers, testing and treatment charts. A Saturation Index Calculator is added to each kit with diagrammed instructions in the lid of a sturdy blow-molded case.

    • Brand: LaMotte
    • ASIN: B005LINR3S
    • UPC: 637395454776

  • SeaKlear SKZ-U-G Commercial Pool Phosphate Remover, 1-Gallon

    This phosphate remover is an easy-to-use treatment for effective and efficient phosphate removal. Generally used in area like pool and spa chemicals. One quart removes at least 9000 ppb of orthophosphates per 10,000 gallons of water. Proven to eliminate phosphates from fertilizers, rainwater, soaps, decaying vegetation and other pollutants. Alum-free, nontoxic formula 100 percent safe for your family and the environment. Maintenance dosage are weekly use 1-ounce of phosphate remover per 5,000 gallons of pool water to maintain phosphate levels below 125 ppb. 1-gallon per bottle.

    • Brand: SeaKlear
    • ASIN: B004A9QT3E
    • UPC: 662817903365

  • Bio Clean: Eco Friendly Hard Water Stain Remover (20oz Large)- Our Professional Cleaner Removes Tuff Water Stains From Shower doors, Windshields, Windows, Chrome, Tiles, Toilets, Granite, steel e.t.c

    The Safest and MOST effective way to Restore your Surfaces stained with hard water. Bio-Clean Products is the original Hard Water SPOT Remover, that actually works. It outperforms any other cleaner. The result of a spotless and renewed surface, bring your previously stained areas back to life! Clean, Seal and Maintain with this kit. Bio-Clean's unique formula can remove years of built up water spots and mineral stains. This professional strength cleaner is recommended for use in hospitals, nursing homes, manufacturing plants, hotels & public facilities. Used by cleaning professionals and auto detailing. It can also remove stubborn stains caused by limescale phosphorous calcium iron acid rain and paint over spray. Use on shower doors, windows tubs and shower pans. Remove hard minerals from brick and concrete. Great for tile and grout cleaning. All in one all purpose cleaner. Remove Heavy stains heavy spots severe spots Heavy limescale etched in hard water build up limescale and rust. Clean fiberglass tubs and showers fountains stone statues concrete pots and statues Calcium stain eraser and Mineral deposit remover Biodegradable cleaner Hard water spot removal Calcium stain remover Calcium stain remover for pools Pool stain eraser Pool stain treatment Pool stain treat Pool stain re...

    • Color: Green
    • Brand: Bio Clean
    • ASIN: B01M7T3D99
    • UPC: 041968791449

  • LaMotte FAS-DPD Commercial 7 Liquid Pool Spa Chemical Water Testing Kit | 7022

    LaMotte FAS-DPD Commercial 7 Water Testing Kit tests the free chlorine, total chlorine, bromine, pH, total alkalinity, calcium hardness, cyanuric acid, acid demand, and base demand in your pool. This kit is designed for public pool operators and commercial service professionals. Compare color results against the included color bar chart using the Octa-Slide 2 Comparator.Keep your public pool water so fresh and so clean when you get accurate results using the LaMotte FAS-DPD Commercial 7 Pool Water Testing Kit. LaMotte FAS-DPD Commercial 7 Water Testing Kit tests the free chlorine, total chlorine, bromine, pH, total alkalinity, calcium hardness, cyanuric acid, acid demand, and base demand in your pool. This kit is designed for public pool operators and commercial service professionals. Compare color results against the included color bar chart using the Octa-Slide 2 Comparator. Keep your public pool water so fresh and so clean when you get accurate results using the LaMotte FAS-DPD Commercial 7 Pool Water Testing Kit. Manufacturer Part Number LM-7022-01 Brand LaMotte

    • Brand: BLOSSOMZ
    • ASIN: B0753XTGR6
    • UPC: 688998042419

  • 10 lbs Bucket 3" Swimming Pool/Spa Commercial Grade Stabilized Chlorine Tablets

    Keep your pool water in perfect swimming condition all season long with these 3" Chlorine Tablets from Nava Chemicals. These 3" Chlorine tablets will help keep your water disinfected, will not cloud your pool water and are ideal for feeders, floaters and skimmer baskets. These 3" Chlorine tablets are concentrated and dissolve slowly in water for optimum safety, and they leave no mineral scale build-up. Plus, they're EPA approved. Strongest chlorine available at 99% Trichlore-s-triazinetrione (Trichlor) Active and 90% chlorine available. Completely Soluble Individually Wrapped Convenient, complete pool care Weight: 10 lbs

    • Brand: NAVA
    • ASIN: B005HWQ37K

  • Taylor Deluxe DPD Pool and Spa Water Test Kit - K-2005

    Taylor Technologies K-2005 Compete Test Kit, High Range. Maintaining safe pool/spa water for the public is an important responsibility. Therefore, precise test results are essential when checking the water quality of commercial pools and spas. Taylor's 2000 Series is designed for the kind of comprehensive, routine testing performed by service technicians, public and semipublic pool operators, and other professionals. Taylor's 2000 Series uses printed color standards to achieve a reliable and accurate color match, making frequent test comparisons even easier. 2000 Series kits feature six different standards for chlorine (High Range: 0.5-5 ppm, Low Range: 0.25-2.5 ppm), bromine (HR: 1-10 ppm, LR: .5-5 ppm) and pH (7.0 to 8.0). The Taylor Complete kit includes nine tests for thorough testing: Total Chlorine, Free Chlorine, Bromine, pH, Acid Demand, Base Demand, Total Alkalinity, Calcium Hardness, and Cyanuric Acid. Includes 3/4 ounce reagent bottles.

    • Color: blue
    • Brand: Taylor Technologies, Inc.
    • ASIN: B001DNXK78
    • UPC: 840036004302

  • Pristine Blue (32 ounce)

    Pristine Blue is the heart of the Pristine Blue non-chlorine pool and spa system. When using Pristine Blue you can swim immediately after application. This product is used to control algae and bacteria in residential swimming pools and hot tubs. Best of all Pristine Blue is environmentally friendly, and EPA registered as an algaecide/bactericide(Nonpublic Health Bacteria). Product Dosage Swimming Pool Start Up: 2 ounces per 1,000 gallons of water. Hot Tub Start Up: 6 milliliters per 100 gallons. These dosages will yield a rate of 0.9 ppm metallic copper. Pristine Blue levels should be checked every 2 weeks. Directions To control algae and nonpublic health bacteria and bacteria that cause odor problems in residential swimming pool, spas and hot tubs: For Pools: Apply at a rate of 2 fluid ounces of Pristine Blue per 1,000 gallons of water (20 fluid ounces per 10,000 gallons) For Spas and Hot Tubs: Apply at a rate of 6 milliliters of Pristine Blue per 100 gallons of water using supplied measuring cup. These dosages will yield a rate of 0.9 ppm metallic copper. Every 14 Days: Test the copper level using a standard commercial swimming pool copper test kit. Add Pristine Blue to raise level back to 0.9 ppm. The amount of Pristine Blue to be added is proportional to the starting concentr...

    • Brand: Pristine Blue
    • ASIN: B005JFSCY2
    • UPC: 761558122322

  • Taylor Complete Pool & Spa Test Kit - High Range K-2005C 2 oz Reagents

    Maintaining safe pool/spa water for the public is an important responsibility. Therefore, precise test results are essential when checking the water quality of commercial pools and spas. Taylor's 2000 Series is designed for the kind of comprehensive, routine testing performed by service technicians, public and semipublic pool operators, and other professionals. Taylor's 2000 Series uses printed color standards to achieve a reliable and accurate color match, making frequent test comparisons even easier. 2000 Series kits feature six different standards for chlorine (High Range: 0.5-5 ppm, Low Range: 0.25-2.5 ppm), bromine (HR: 1-10 ppm, LR: .5-5 ppm) and pH (7.0 to 8.0). The Taylor Complete kit includes nine tests for thorough testing...Total Chlorine, Free Chlorine, Bromine, pH, Acid Demand, Base Demand, Total Alkalinity, Calcium Hardness, and Cyanuric Acid.

    • Brand: Taylor Technologies, Inc.
    • ASIN: B0002IXIHM
    • UPC: 840036004326