• JEGS Performance Products 30051 Ceramic Coated Long Tube Headers

    Ceramic Coated Long Tube HeadersSmall Block Chevy 265-4001964-1977 Chevelle/Monte Carlo1965-1989 Full Size1967-1981 Camaro1968-1979 Nova1-5/8" Primary, 3" Collector, 2.5" Reducers Must modify stock exhaust to retain catalytic converter(s). Will not fit with A.I.R. pump. Installation on vehicles 78 and earlier with air conditioning will require purchase of 555-30782 bracket. 79 and later vehicles equipped with short compressor will re-use the original bracket. Must modify lower A-Arm support bracket on 79-81 models. Will not fit angle plug heads. Pre-70 vehicles with exhaust mounted alternator/generator will require purchase of 555-30780 bracket. Will not fit 67-69 Camaro with A/C. The #1 tube (front drivers) has a small dent for spark plug and spark plug wire clearance.AutomaticStandardColumnFloorColumnFloorYesYesNoYes

    • Brand: JEGS
    • ASIN: B078WHXWKK
    • UPC: 889944038016

  • Doug's Headers D322 2" 4-Tube Full Length Metallic Ceramic Coated Exhaust Header for Big Block Chevrolet 64-67

    Header development and design is complex and requires a substantial amount of time and resources to do the job right! Every Doug's header is tuned with the proper tube size and length to efficiently remove all the exhaust from each cylinder, reducing pumping losses resulting in a dramatic increases in horsepower and torque. Doug's headers are carefully developed on the vehicles they are intended to fit and are re-checked numerous times during the design and manufacturing process.

    • Brand: Doug's Headers
    • ASIN: B0050SFCFK
    • UPC: 694342507220

  • Gibson GP129S-C Ceramic Coated Performance Header

    Every Gibson Header is Dyno-tuned and engineered to deliver more usable horsepower and torque at low and mid-range RPM highway speeds. Improves engine’s ability to breathe and cooler operating engine temperature. Designed as a direct replacement for the factory manifolds, using the stock crossover pipe. They are well suited for lowered and raised vehicles, street and off-road. 50 State Street legal. Meets EPA and CARB requirements. Will not affect the factory warranty.

    • Color: Ceramic Coated
    • Brand: Gibson Performance Exhaust
    • ASIN: B000CCFZJW
    • UPC: 677418009453

  • Ceramic Coated CLIPSTER HEADERS FOR SBC CHEVY V8 A/F/G BODY ROD 262 305 327 350

    --These mid length ceramic coated headers are designed to fit Camaro, Chevelle, Nova and Monte Carlo with a Small Block Chevy. --Works for automatic and most manual transmission cars. --Does not work with Saginaw close ratio with 825 power steering box. No A/C -- Mid length or "clippster" headers provide improved ground clearance for popular muscle cars and street rods. Application:(but may not be limited to) '65-'76 Bel Air '67-'81 Camaro (except '67-'69 w/ factory air or p/s) '66-'93 Caprice '64-'77 Chevelle '68-'79 Chevy II '65-'77 El Camino '64-'87 Impala '70-'77 Monte Carlo '68-'79 Nova Specification: --These headers are made with 1 5/8" OD diameter heavy duty ceramic coated mandrel bent 18 gauge tubing. --3" collector, reducers are 2 1/2". --2x4-1 Racing design --Made with thick 3/8" flanges to resist war page! --Head Flange Thickness: 7/16" --Increase high flow air, instantly gain 10 to 15 Hp. / Tq. Package: Both headers, bolt on reducers, exhaust gaskets, collector gaskets, and all necessary bolts. Note: Professional Installation is Highly Recommended

    • Brand: DEMOTOR
    • ASIN: B010H012MW

  • For Nissan Altima Performance 4-1 Design Stainless Steel Exhaust Header Kit (Silver Ceramic Coated) S SL

    The exhaust manifold found on the 2002-2006 Nissan Altima DOHC 4 Cylinder Engine were designed to combine the exhaust gasses from each of the cylinders quickly with a manifold that was cost effective to produce. Our 4-1 off-road racing headers are designed to allow the exhaust gasses to flow more freely from each cylinder and combine in a more efficient manner. Tubing has been optimized for the 2.5L engine. This creates a reduction in cylinder backpressure and improved exhaust gas velocity. These improvements free up lost horsepower and torque. An added benefit is a more performance oriented exhaust sound.Package Included:1 x Header exhaust systemAll necessary hardware, bolts, and gaskets includedCompatible with:02-06 Nissan Altima 2.5L l4

    • Color: Silver Coated
    • Brand: Auto Dynasty
    • ASIN: B00K0OT4QC

  • For Small Block Ford 289 302 351W Tight Fit Ceramic Coated Hugger Headers SBF

    This listing is for a brand new set of small block ford 289/302/351w Headers. These tight-fit headers are designed to hug tight against your small block Ford V8 and can make seemingly impossible installations much easier to tackle. Designed for factory style oval port heads, these will work with GT40P heads. Includes 2.5" reducers, gaskets and bolts. Left mount may need to be ground 1/4?to provide clearance for collector Fits engines with forward sump oil pans Tube O.D.: 1.630" Collector Diameter: 2.500" (2 1/2") Collector Length: 3.000" Flange Style: Round Port Flange Thickness: 0.350" Port Height: 1.880" Port Width: 1.330" Hardware Included: Yes Gasket(s) Included: Yes

    • Brand: DEMOTOR
    • ASIN: B00WT6D8XY

  • For Ford Mustang GT 4-1 Design 2-PC Stainless Steel Long Tube Exhaust Header Kit (Silver Ceramic Coated) - SN95

    The exhaust manifolds found in the 1996-2004 Ford Mustang GT were designed to combine the exhaust gasses from each of the cylinders quickly with a manifold that was cost effective to produce. Our 4-1 Long Tube off-road headers are designed to allow the exhaust gasses to flow more freely from each 4 cylinder bank and combine in a more efficient manner. Tubing has been optimized for the 4.6L engine. This creates a reduction in cylinder backpressure and improved exhaust gas velocity. These improvements free up lost horsepower and torque. An added benefit is a more performance oriented exhaust sound.Package Included:1 x Header exhaust systemAll necessary hardware, bolts, and gaskets includedCompatible with:96-04 Ford Mustang GT

    • Color: Silver Ceramic Coated
    • Brand: Auto Dynasty
    • ASIN: B00SXVF1AM

  • Doug's Headers D564 1-3/4" 4-Tube Full Length Metallic Ceramic Coated Exhaust Header for Pontiac GTO 326-455 64-67

    Header development and design is complex and requires a substantial amount of time and resources to do the job right! Every Doug's header is tuned with the proper tube size and length to efficiently remove all the exhaust from each cylinder, reducing pumping losses resulting in a dramatic increases in horsepower and torque. Doug's headers are carefully developed on the vehicles they are intended to fit and are re-checked numerous times during the design and manufacturing process.

    • Brand: Doug's Headers
    • ASIN: B0050SG3DK
    • UPC: 694342509781

  • BBK (40140) 1-5/8" Silver Ceramic Coated Shorty Tuned-Length Exhaust Header for Dodge Truck

    These BBK Performance shorty tuned Length exhaust Headers are designed and constructed as direct fit replacements for all 09-14 Dodge Ram truck 5.7L applications. Each header is manufactured with 1-5/8 CNC mandrel bent tubing that offers unrestricted exhaust flow for increased horsepower and torque over factory OEM manifolds. BBK tuned Length headers offer improved scavenging waves for better combustion, which leads to improved performance and fuel economy over stock or equal Length headers. As with all BBK Performance exhaust headers they feature a 3/8 laser cut flange for additional strength and a guaranteed leak free fit. All headers are robotically and precision hand welded and then pressure tested to ensure years of reliability and performance in the real world. All BBK exhaust headers are available in a bright chrome or polished silver ceramic coated finish and include new exhaust header gaskets, header bolts and hardware to complete the installation.

    • Color: Silver Ceramic Finish
    • Brand: BBK Performance
    • ASIN: B007V97KKG
    • UPC: 197975401403