• Elegoo EL-CB-001 UNO R3 Board ATmega328P ATMEGA16U2 with USB Cable for Arduino

    We have the manufacture factory, making productions and selling by ourselves. So we can control the quality of our productions by ourselves for you. We'd like to receive your valuable suggestions for our products and make your idea come true. Features * ATmega328P microcontroller * Input voltage - 7-12V * 5V Electric current: 500MA * 3.3V Electric current: 50MA * 14 Digital I/O Pins (6 PWM outputs) * 8 Analog Inputs * 32k Flash Memory * 16Mhz Clock Speed Component listing: 1pcs UNO R3 Development Board 1pcs USB cable.

    • Brand: ELEGOO
    • ASIN: B01EWOE0UU
    • UPC: 753070352042

  • HiLetgo FT232RL FTDI Mini USB to TTL Serial Converter Adapter Module 3.3V 5.5V FT232R Breakout FT232RL USB to Serial Mini USB to TTL Adapter Board for Arduino

    Specifications: USB power has over current protection, using 500MA self-restore fuse. RXD/TXD transceiver communication indicator. Pitch:2.54mm. Please download the driver and files at link: http://www.ftdichip.com/FTDrivers.htm Package included: 1* FT232RL USB to TTL Serial Adapter Module Note: This adapter is not genuine FTDI chip because it's based on so cheap a price, so it will be automatically bricked by the latest FTDI drivers in Windows.The fix is to ensure that you use the older version of the FTDI drivers (2.8.3) on windows or use only with Linux or OS X. If you've already bricked it, please follow these instructions at below link (requires a Debian based Linux http://www.minipwner.com/index.php/unbrickftdi000 Tips: 1. You need to use an external power source for the ESP-12 because standard USB doesn't put out enough current, otherwise you'll have problems programming it. 2.Make sure the USB cable you use to connect this to your computer is a data cable, not a charging only cable.If you used it to flash an ESP8266 chip, please check the below steps: 1. Make sure you switch the jumper from the 5v to 3v if working with the ESP8266. 2:Check connections RX to TX, and then TX to RX on this one. 3:Put GPIO0 to ground when powering on to enter Boot/Flashing mode. 4:Remo...

    • Brand: HiLetgo®
    • ASIN: B00IJXZQ7C
    • UPC: 509049833148

  • Elegoo EL-CB-003 MEGA 2560 R3 Board ATmega2560 ATMEGA16U2 + USB Cable for Arduino

    We have the manufacture factory, making productions and selling by ourselves. So we can control the quality of our productions by ourselves for you. We'd like to receive your valuable suggestions for our products and make your idea come true. This version is optimized in the original version , mainly for customers under the functional requirements for product quality and high case designed both to ensure consistent and compatible with the original, but also easy to use. Microcontroller: ATmega2560 Operating Voltage: 5V Input:Voltage(recommended) :7-9V Digital I/O Pins: 54 (of which 15 provide PWM output) Analog Input Pins: 16 DC Current per I/O Pin: 40 mA DC Current for 3.3V Pin: 50 mA Flash Memory: 256 KB of which 8 KB used by bootloader SRAM: 8 KB EEPROM: 4 KB Clock Speed: 16 MHz Package includes: 1 x Mega 2560 ATmega2560-16AU Board (Arduino-compatible) 1 x USB cable

    • Color: Blue
    • Brand: ELEGOO
    • ASIN: B01H4ZLZLQ
    • UPC: 746591610562

  • Devbattles | Arduino Uno R3 - Microcontroller Board Based on ATmega328 Original & USB cable

    The Arduino Uno Rev3 is a microcontroller board based on the ATmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs) -6 analog inputs, a 16 MHz crystal oscillator -USB connection, a power jack, an ICSP header -Reset button . It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Uno differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the Atmega8U2 programmed as a USB-to-serial converter. "Uno" means one in Italian and is named to mark the upcoming release of Arduino 1.0. The Uno and version 1.0 will be the reference versions of Arduino, moving forward. The Uno is the latest in a series of USB Arduino boards. Microcontroller ATmega328 - Operating Voltage:5V - Input Voltage (recommended): 7-12V - Input Voltage (limits): 6-20V - Digital I/O Pins: 14 (of which 6 provide PWM output) - Analog Input Pins: 6 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA - Flash Memory: 32 KB of which 0.5 KB used by bootloader SRAM - 2 KB EEPROM - 1 KB Clock Speed - 16 MHz. Arduino Software (IDE) on your computer, according to its operating system. - Windows - ...

    • Color: blue
    • Brand: devbattles
    • ASIN: B01L21Y916
    • UPC: 648609530438

  • Qunqi 3.3V 5.5V FT232RL FTDI Usb to TTL Serial Adapter Module for Arduino Mini Port

    Package include: 1x Ft232rl Module

    • Brand: Qunqi
    • ASIN: B014Y1IMNM

  • Micro USB FTDI Basic Breakout Module for Arduino 3.3V/5V

    The newest revision of our FTDI Basic with micro USB port, which use a 6-pin header on the bottom, smaller and more compact. Functionality has remained the same. This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with Arduino boards. It can also be used for general serial applications. The major difference with this board is that it brings out the DTR pin as opposed to the RTS pin of the FTDI cable. The DTR pin allows an Arduino target to auto-reset when a new Sketch is downloaded. This is a really nice feature to have and allows a sketch to be downloaded without having to hit the reset button. This board will auto reset any Arduino board that has the reset pin brought out to a 6-pin connector. The pins labeled BLK and GRN correspond to the colored wires on the FTDI cable. The black wire on the FTDI cable is GND, green is CTS. Use these BLK and GRN pins to align the FTDI basic board with your Arduino target. This board has TX and RX LEDs that make it a bit better to use over the FTDI cable. You can actually see serial traffic on the LEDs to verify if the board is working. This board was designed to decrease the cost of Arduino development and increase ease of use (the auto-reset feature rocks!).

    • Brand: TinySine
    • ASIN: B00N4MCS1A
    • UPC: 701203386389

  • Cylewet 3Pcs USB Nano V3.0 ATMEGA328P Module CH340G 5V 16M Micro-controller Board for Arduino (Pack of 3) CYT1060

    CH340G replace FT232RL Operating Voltage(logic level): 5V 8 analog inputs ports: A0 ~ A7 14 Digital input/ output ports:TX,RX,D2 ~ D13 6 PWM ports: D3, D5, D6, D9, D10, D11 1 pairs of TTL level serial transceiver ports RX/ TX Using Atmel Atmega328P-AU MCU There is boot loader installed in it Support USB download and Power Support ISP download Support for external 5V ~ 12V DC power supply Support power supply by 9V battery CH340G Driver Download link: http://www.wch-ic.com/download/list.asp?id=126 or http://www.5v.ru/ch340g.htm IDE of arduino Download link: http://arduino.cc/en/Main/Software Package Includes: 3× Nano V3.0 ATMEGA328P Micro-controller Board 6× Single Row Pin Header(15 pins) 3× Double Row Pin Header(3 pins)

    • Brand: Cylewet
    • ASIN: B06XFSZW6C
    • UPC: 729680036627

  • DSD TECH USB to TTL Serial Converter CP2102 with 4 PIN Dupont Cable Compatible with Windows 7,8,10,linux,Mac OSX

    With this USB to TTL conversion cable, you can easily communicate with your Arduino Board, ST MCU, and Raspberry Pi and other MCUs via your computer. CP2102 USB to TTL Transfer chip from Silicon Labs, Industrial chip, high quality, super stable. Standard USB power supply, the lead pin includes: 3.3V, GND, TXD, RXD, 5V, GND Supports Windows 2000, XP, Vista, Window 7, 8, 10, Mac OS 9, Mac OS X & Linux About WARRANTY We back this USB to TTL board with 12 months warranty.If you meet any question, please contact us, we will fix your issue within 24 hours.

    • Color: Multicoloured
    • Brand: DSD TECH
    • ASIN: B072K3Z3TL
    • UPC: 603717226864

  • Mini Nano V3.0 ATmega328P Microcontroller Board w/USB Cable For Arduino

    Features: Nano V3.0 ATmega328P Microcontroller Board  w/USB Cable For Arduino Fully Compatible to Arduino Nano V3.0 ATmega328P-AU ATmega328 Microcontroller Bootloader installed, ready to upload sketches from Arduino software Microcontroller ATmega328P-AU Operating Voltage :5V Input Voltage (recommended) 7V-12V Input Voltage (limits) 6V-20V Digital I/O Pins 14 (of which 6 provide PWM output) Analog Input Pins 8 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA Flash Memory 32 KB (ATmega328) of which 2 KB used by bootloader SRAM 2 KB   EEPROM 1 KB   Clock Speed 16 MHz Dimention:Approx. 45x17x19mm Cable Length:245mm Color:Blue(as the picture shows) Package: 1 xNano V3.0 ATmega328P Arduino Compatible Board 1 xMini USB Cable

    • Color: 1pcs board+1pcs cable
    • Brand: Makerfire
    • ASIN: B00NLAMS9C
    • UPC: 889736744767