• Everflow BRRL1141-NL 1-1/4-Inch x 1/2-Inch Lead Free 90-Degree Brass Reducing Elbow with Female Threaded Ends, Brass Construction, Higher Corrosion Resistance Economical & Easy to Install

    This is an Everflow Supplies lead free brass reducing elbow, with 90 degree bend and with 1-1/4 x 1/2 inch female threaded ends to connect and change the flow direction between two pipes of different sizes. In particular, the part is made of of brass and is designed for applications where the pressure does not exceed 125 LB. Furthermore, the part is produced in an ISO 9001:2000 qualified production environment and it has been pressure tested with air in the factory. The class 125 coupling is made from brass, which is more economical, machinable, and offers greater corrosion resistance than steel. Class is a standard relating to tolerance, construction, dimension, and wall thickness, but it is not a direct measurement of maximum working pressure. Brass finished plumbing fitting, made from premium materials, this plumbing fitting offers great function and value for your home. In addition, the fitting complies to the applicable ANSI and to the ASTM B62 standards and it is approved by TL in meeting NSF/ANSI 61-8 standards for quality assurance.

    • Brand: Everflow Supplies
    • ASIN: B00N2SCJME
    • UPC: 804595990957

  • EDGE INDUSTRIAL FORGED BRASS 90 DEGREE REDUCING STREET ELBOW 3/8" FEMALE NPT X 1/2" MALE NPT FUEL/AIR/WATER/OIL/GAS WOG

    3/8" Female NPT x 1/2" Male NPT 90° Forged Brass Reducing Elbow Pipe Fitting. Used for a variety of applications, not limited to grease, fuels, refrigeration, water, oil gas, and hydraulic systems. Working pressure of 1200 PSI. Temperature range of -65°F to 250°F (-53°C to 121°C). Meets the standards of ASA, ASME and SAE. Not deemed lead free. Not for use with potable water. Please Note: NPT Thread size is NOT determined by its outside thread diameter in inches. Please review our attached NPT sizing chart to cross reference NPT thread size to linear inches

    • Brand: EDGE INDUSTRIAL
    • ASIN: B07D25HK2B
    • UPC: 691023895768

  • EDGE INDUSTRIAL FORGED BRASS 90 DEGREE REDUCING STREET ELBOW 1/4" FEMALE NPT X 3/8" MALE NPT FUEL/AIR/WATER/OIL/GAS WOG

    1/4" Female NPT x 3/8" Male NPT 90° Forged Brass Reducing Elbow Pipe Fitting. Used for a variety of applications, not limited to grease, fuels, refrigeration, water, oil gas, and hydraulic systems. Working pressure of 1200 PSI. Temperature range of -65°F to 250°F (-53°C to 121°C). Meets the standards of ASA, ASME and SAE. Not deemed lead free. Not for use with potable water. Please Note: NPT Thread size is NOT determined by its outside thread diameter in inches. Please review our attached NPT sizing chart to cross reference NPT thread size to linear inches

    • Brand: EDGE INDUSTRIAL
    • ASIN: B07D24CYWD
    • UPC: 691023895744

  • Everflow BRRL1143-NL 1-1/4-Inch x 1-Inch Lead Free 90-Degree Brass Reducing Elbow with Female Threaded Ends, Brass Construction, Higher Corrosion Resistance Economical & Easy to Install

    This is an Everflow Supplies lead free brass reducing elbow, with 90 degree bend and with 1-1/4 x 1 inch female threaded ends to connect and change the flow direction between two pipes of different sizes. In particular, the part is made of of brass and is designed for applications where the pressure does not exceed 125 LB. Furthermore, the part is produced in an ISO 9001:2000 qualified production environment and it has been pressure tested with air in the factory. The class 125 coupling is made from brass, which is more economical, machinable, and offers greater corrosion resistance than steel. Class is a standard relating to tolerance, construction, dimension, and wall thickness, but it is not a direct measurement of maximum working pressure. Brass finished plumbing fitting, made from premium materials, this plumbing fitting offers great function and value for your home. In addition, the fitting complies to the applicable ANSI and to the ASTM B62 standards and it is approved by TL in meeting NSF/ANSI 61-8 standards for quality assurance.

    • Brand: Everflow Supplies
    • ASIN: B00N2SCK6Y
    • UPC: 804595990971

  • Everflow BRRL1004-NL 1-Inch x 3/4-Inch Lead Free 90-Degree Brass Reducing Elbow with Female Threaded Ends, Brass Construction, Higher Corrosion Resistance Economical & Easy to Install

    This is an Everflow Supplies lead free brass reducing elbow, with 90 degree bend and with 1 x 3/4 inch female threaded ends to connect and change the flow direction between two pipes of different sizes. In particular, the part is made of of brass and is designed for applications where the pressure does not exceed 125 LB. Furthermore, the part is produced in an ISO 9001:2000 qualified production environment and it has been pressure tested with air in the factory. The class 125 coupling is made from brass, which is more economical, machinable, and offers greater corrosion resistance than steel. Class is a standard relating to tolerance, construction, dimension, and wall thickness, but it is not a direct measurement of maximum working pressure. Brass finished plumbing fitting, made from premium materials, this plumbing fitting offers great function and value for your home. In addition, the fitting complies to the applicable ANSI and to the ASTM B62 standards and it is approved by TL in meeting NSF/ANSI 61-8 standards for quality assurance.

    • Brand: Everflow Supplies
    • ASIN: B00N2SCB3Q
    • UPC: 804595990933

  • Everflow Supplies GMRL3001 3" x 2" 90 Degree Galvanized Malleable Iron Reducing Elbow for High Pressures

    This is an ever flow reducing elbow, from their pipe fittings line, with 90 Degree bend and with 3 inch x 2 inch female threaded ends. The Part is made of Malleable iron, with a galvanized finish, and is designed for applications where the pressure does not exceed 150 lb. The Part is produced in an ISO 9001:2000 qualified production environment and it has been pressure tested in the factory. The fitting complies to the ansi/asme B16.3 and B16.14 and to the ASTM a-197 standards. It is approved by UL/ULC and FM.

    • Brand: Everflow Supplies
    • ASIN: B016Y8KT9I
    • UPC: 804595935231

  • Everflow Supplies GMRL1121 1-1/2" x 3/4" 90 Degree Galvanized Malleable Iron Reducing Elbow for High Pressures

    This is an ever flow reducing elbow, from their pipe fittings line, with 90 Degree bend and with 1-1/2" x 3/4" female threaded ends. The Part is made of Malleable iron, with a galvanized finish, and is designed for applications where the pressure does not exceed 150 lb. The Part is produced in an ISO 9001:2000 qualified production environment and it has been pressure tested in the factory. The fitting complies to the ansi/asme B16.3 and B16.14 and to the ASTM a-197 standards. It is approved by UL/ULC and FM.

    • Brand: Everflow Supplies
    • ASIN: B016Y8KNLW
    • UPC: 804595935088

  • Everflow BRRL1121-NL 1-1/2-Inch x 1/2-Inch Lead Free 90-Degree Brass Reducing Elbow with Female Threaded Ends, Brass Construction, Higher Corrosion Resistance Economical & Easy to Install

    This is an Everflow Supplies lead free brass reducing elbow, with 90 degree bend and with 1-1/2 x 1/2 inch female threaded ends to connect and change the flow direction between two pipes of different sizes. In particular, the part is made of of brass and is designed for applications where the pressure does not exceed 125 LB. Furthermore, the part is produced in an ISO 9001:2000 qualified production environment and it has been pressure tested with air in the factory. The class 125 coupling is made from brass, which is more economical, machinable, and offers greater corrosion resistance than steel. Class is a standard relating to tolerance, construction, dimension, and wall thickness, but it is not a direct measurement of maximum working pressure. Brass finished plumbing fitting, made from premium materials, this plumbing fitting offers great function and value for your home. In addition, the fitting complies to the applicable ANSI and to the ASTM B62 standards and it is approved by TL in meeting NSF/ANSI 61-8 standards for quality assurance.

    • Brand: Everflow Supplies
    • ASIN: B00N2SCJU6
    • UPC: 804595990995

  • Everflow BRRL0122-NL 1/2-Inch x 3/8-Inch Lead Free 90-Degree Brass Reducing Elbow with Female Threaded Ends, Brass Construction, Higher Corrosion Resistance Economical & Easy to Install

    This is an Everflow Supplies lead free brass reducing elbow, with 90 degree bend and with 1/2 x 3/8 inch female threaded ends to connect and change the flow direction between two pipes of different sizes. In particular, the part is made of of brass and is designed for applications where the pressure does not exceed 125 LB. Furthermore, the part is produced in an ISO 9001:2000 qualified production environment and it has been pressure tested with air in the factory. The class 125 coupling is made from brass, which is more economical, machinable, and offers greater corrosion resistance than steel. Class is a standard relating to tolerance, construction, dimension, and wall thickness, but it is not a direct measurement of maximum working pressure. Brass finished plumbing fitting, made from premium materials, this plumbing fitting offers great function and value for your home. In addition, the fitting complies to the applicable ANSI and to the ASTM B62 standards and it is approved by TL in meeting NSF/ANSI 61-8 standards for quality assurance.

    • Brand: Everflow Supplies
    • ASIN: B00N2SC2F8
    • UPC: 804595990841