• CTS 500K TAOT CUSTOM LONG Split Shaft Audio Taper Potentiometer - 1X

    We are are pleased to offer our own custom branded 450g pots manufactured by CTS. These 450S custom series pots are identical in construction to CTS's high quality 450G series pots made specifically for guitars. These audio taper pots are suitable for both tone and volume controls. Some of the features of this pot are: 500K Ohms/10% Tolerance Audio Taper Bakelite base plate Solid brass c-clip reinforced shaft Solid brass bushing 3/8-32 US thread 3/4" (long shaft) bushing height Split, fine 24-tooth, knurled, 1/4" diameter shaft Chamfered shaft for easier knob installation and removal Each pot comes with hardware - nut, dress washer and lock washer Requires 3/8 inch; diameter mounting hole Pot is manufactured and branded by CTS specifically for The Art Of Tone (TAOT), Part # 450S500KXL TAOT. Great pots at reasonable price and you can only get them here. Note: 1. If you are uncertain whether your guitar uses short (3/8") or long (3/4") shaft pots, as a general rule this pot will fit most USA-made Gibson Les Paul's manufactured after 1977 excluding historic reissues, but please double check before you order. 2. Make sure to pinch the tip of the shaft before you try fitting a knob, this will avoid getting knobs stuck before you install the pot. If you've ever had that happen... 3. If...

    • Brand: The Art Of Tone (TAOT)
    • ASIN: B01LWQYRLD
    • UPC: 691852991969

  • Allparts CTS 500K SHORT Split Shaft Audio Taper Potentiometer

    CTS 500K short shaft (3/8" bushing height) potentiometer. Audio taper suitable for either tone or volume controls. Not intended for use in import guitars that use metric components

    • Brand: Allparts CTS
    • ASIN: B01DFIGIB8
    • UPC: 683405543503

  • Set of 4 (4X) CTS Custom 450S 500K LONG Split Shaft Audio Taper Potentiometers - 450G

    We are are pleased to offer our own custom branded 450g pots manufactured by CTS. These 450S custom series pots are identical in construction to CTS's high quality 450G series pots made specifically for guitars. These audio taper pots are suitable for both tone and volume controls. Some of the features of this pot are: 500K Ohms/10% Tolerance Audio Taper Bakelite base plate Solid brass c-clip reinforced shaft Solid brass bushing 3/8-32 US thread 3/4" (long shaft) bushing height Split, fine 24-tooth, knurled, 1/4" diameter shaft Chamfered shaft for easier knob installation and removal Each pot comes with hardware - nut, dress washer and lock washer Requires 3/8 inch; diameter mounting hole Pot is manufactured and branded by CTS specifically for The Art Of Tone (TAOT), Part # 450S500KXL TAOT. Great pots at reasonable price and you can only get them here. Note: 1. If you are uncertain whether your guitar uses short (3/8") or long (3/4") shaft pots, as a general rule this pot will fit most USA-made Gibson Les Paul's manufactured after 1977 excluding historic reissues, but please double check before you order. 2. Make sure to pinch the tip of the shaft before you try fitting a knob, this will avoid getting knobs stuck before you install the pot. If you've ever had that happen... 3. If...

    • Brand: The Art Of Tone (TAOT)
    • ASIN: B00KME1F2G
    • UPC: 683405542889

  • YXQ B500K Taper Potentiometer 500K ohm Adjustment Single Linear Split Audio with Rotary Knob Cover Cap Pot 6 Pieces

    500K ohm Top adjustment type Knurled Shaft Single Linear (Type B) Potentiometer easy operate and main used to control electrical devices such as volume controls on audio equipment.SpecificationShaft Diameter : 6mm / 0.23"Shaft Length : 13mm / 0.51"Mounting Hole : 7.5mm / 0.29"Base Height : 7mm / 0.27"Base Diameter : 16mm / 0.62

    • Brand: YXQ
    • ASIN: B077T1NHKG
    • UPC: 615150933964

  • Bulk Lot of 10 (10X) CTS 450S Series 500K Short (3/8" bushing) Split Shaft Audio Taper Potentiometers

    These are our own custom branded pots manufactured by CTS. These are identical in construction to CTS's high quality 450G series pots, .Here are the specifications on the pots: 500K Ohms - 10% Tolerance. Audio Taper Bakelite base plate Solid brass c-clip reinforced shaft Solid brass bushing 3/8-32 US thread, short (3/8") bushing height, split 24-tooth fine knurled shaft .236 inch diameter shaft Each pot comes with hardware - a nut, dress washer and lock washer Requires 3/8 inch diameter mounting hole. Pot is manufactured and branded by CTS specifically for The Art Of Tone (TAOT), Part # 450S500K TAOT. Note: 1. If you are uncertain whether your guitar uses short (3/8 inch) or long (3/4 inch) shaft pots, as a general rule this pot will fit most USA-made Gibson Les Paul's manufactured prior to 1977, and historic reissues, but please double check before you order. 2. Make sure to pinch the tip of the shaft before you try fitting a knob, this will avoid getting knobs stuck before you install the pot. If you've ever had that happen... 3. If you have an import guitar it is probably using metric sized components and these pots cannot be used without modifying the openings on your guitar.

    • Brand: The Art Of Tone
    • ASIN: B01EW2ZHTA
    • UPC: 683405543725

  • Alpha Control Pots for Electric Gutar, 250K-ohm - 4 Pack

    SAVE WHEN YOU BUY A 4 PACK!Great price!Alpha potentiometers are among the world's most widely used guitar tone and volume controls. Each pot has an aluminum split shaft that fits a coarse-knurled (18-spline) knob.500K pots are standard controls for humbuckers, and 250Ks are usually used for single-coil pickups. A 250K gives a slightly warmer tone than a 500K, and bleeds off (attenuates) some of the high frequencies to ground.Shaft diameter: 6mm split shaft, coarse knurlingThread: M8 x 0.75Threaded portion height: 3/8" (9.52mm)Required mounting hole diameter: 5/16"(7.94mm)Alpha pots are audio taper with standard ±20% resistance tolerance. Each pot includes a flat washer, lock washer, and two hex mounting nuts for custom height adjustment on a pickguard or control plate.Which pot value should you choose?500K pots are standard controls for humbuckers, and 250Ks are usually used for single-coil pickups. A 250K gives a slightly warmer tone than a 500K, and bleeds off some of the high frequencies to ground. A 1-meg pot bleeds off even less than a 500K-try one if you want to hear your guitar "wide open."1-meg pots are also ideal for piezo pickups, as the ultra high impedance piezo element is more adversely effected by conventional, lower-value pots than magnetic pickups.25K pots are fo...

    • Brand: Alpha Electronics
    • ASIN: B01HUCYY0C

  • WD Music WD500 Full Size 500K Pot Split Shaft

    500k-ohm audio taper, full size pot. Generally used for humbuckers and high output pickups

    • Color: Nickel
    • Brand: WD Music
    • ASIN: B0006ZPAAO
    • UPC: 820454014145

  • CTS TAOT Custom 500K SHORT Split Shaft Audio Taper Pots - Set of Four (4X) - 10% Tolerance - 450G

    We're are pleased to offer our own custom branded pots manufactured by CTS. These 450S custom series pots are identical in construction to CTS's high quality 450G series pots made specifically for guitars. These audio taper pots are suitable for both tone and volume controls. Some of the features of this pot are: 500K Ohms/10% Tolerance Audio Taper Bakelite base plate Solid brass c-clip reinforced shaft Solid brass bushing 3/8-32 US thread 3/8" (short shaft) bushing height Split, fine 24-tooth, knurled, 1/4" diameter shaft Chamfered shaft for easier knob installation and removal Each pot comes with hardware - nut, dress washer and lock washer Requires 3/8" diameter mounting hole Pot is manufactured and branded by CTS specifically for The Art Of Tone (TAOT), Part # 450S500K TAOT. Great pots at reasonable price and you can only get them here. Note: 1. If you are uncertain whether your guitar uses short (3/8") or long (3/4") shaft pots, as a general rule this pot will fit most USA-made Gibson Les Paul's manufactured before 1977, Gibson historic reissues, PRS and Hamer guitars, but please double check before you order. 2. Make sure to pinch the tip of the shaft before you try fitting a knob, this will avoid getting knobs stuck before you install the pot. If you've ever had that happe...

    • Brand: The Art Of Tone
    • ASIN: B00KMDVKUO
    • UPC: 683405542872

  • Musiclily 500K Split Shaft Mini AudioTaper Potentiometer Guitar Pot for Tone Control (Pack of 2)

    100% NewSmall Long KindFull Resistance: 500k ohmA TypeShaft Length: 18mmShaft Diameter: 6mmWhole Length: 27mmBase Diameter: 16mmLong Knurled and split shaft

    • Color: A500K
    • Brand: Musiclily
    • ASIN: B00G9AZQXG
    • UPC: 632963174230