• Jekewin 1 Pcs ATMEGA32-16PU 8-bit AVR Microcontroller with 32K Bytes In-System Programmable Flash MCU ATMEGA 16MHZ, DIP-40

    32K Bytes of In-System Self-Programmable Flash Optional Boot Code Section with Independent Lock Bits 1024 Bytes EEPROM 2K Byte Internal SRAM Programming Lock for Software Security 32 Programmable I/O Lines 40-pin PDIP Operating Voltages:4.5 - 5.5V for ATmega32 0 - 16 MHz for ATmega32 8-channel, 10-bit ADC

    • Brand: Jekewin
    • ASIN: B071VYGJB9
    • UPC: 191094308421

  • Arduino Micro with Headers A000053 - Mini Controller 5V 16 MHz ATmega32u4

    Arduino Micro is the smallest board of the family, easy to integrate it in everyday objects to make them interactive. The Micro is based on the ATmega32U4 microcontroller featuring a built-in USB which makes the Micro recognizable as a mouse or keyboard. The Micro is a microcontroller board based on the ATmega32U4 (datasheet), developed in conjunction with Adafruit. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a micro USB cable to get started. It has a form factor that enables it to be easily placed on a breadboard. The Micro board is similar to the Arduino Leonardo in that the ATmega32U4 has built-in USB communication, eliminating the need for a secondary processor. This allows the Micro to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial / COM port. It also has other implications for the behavior of the board; these are detailed on the getting started page. The maximum length and width of the Micro PCB are 4.8cm and 1.77cm respectively, with the USB connector extending beyond the former dimen...

    • Brand: Arduino
    • ASIN: B00AFY2S56
    • UPC: 758399181809

  • SUKRAGRAHA Mini USB Nano V3.0 ATMEGA328P Module 5V 16MHz Micro-controller board for Arduino Genuino System

    Package: 1 xNano V3.0 ATmega328P Arduino Compatible Board

    • Color: Blue
    • Brand: SUKRAGRAHA
    • ASIN: B01962IDC4
    • UPC: 639385301770

  • Fenteer Replacement Car 16MHz MP3 FM Radio Convertor Transmitter

    Description: - Product Name : Car FM Converter - Fit Car Voltage: 12V DC - Frequency: 16MHz - To transmit MP3 music by FM frequency to car stereo audio system. - Firstly please to adjust this product's frequency and car radio frequency at the same level.Specification: - Main Color: Blue - Material: Aluminum+Plastic - Size: Approx 62*25*25mm - Cable Length: Approx 160mmPackage Includes:1 Piece Car FM ConverterNote:Please allow 0.5-1 inch difference due to manual measurement.(1 inch=2.54cm)Please check the size measurement and the picture carefully before making payment.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Please understand,Thank you.

    • Brand: Fenteer
    • ASIN: B077S386CK
    • UPC: 074470400394

  • XCSOURCE 5pc Pro Mini Enhancement ATMEGA328P 16MHz 5V Compatible Arduino PRO Module TE362

    Description ATmega328 running at 16MHz with external resonator (0.5% tolerance) USB connection off board Supports auto-reset Max 150mA output Over current protected Reverse polarity protected DC input 5V up to 12V On board Power and Status LEDs Size: 33mmX18mmX6mm Package included 5x Pro Mini Enhancement ATMEGA328P 16MHz 5V Compatible Arduino PRO Module

    • Brand: XCSOURCE
    • ASIN: B015MGHLNA

  • HiLetgo STM32F103C8T6 ARM STM32 Minimum System Development Board Module STM32F103C8T6 Core Learning Board For Arduino

    STM32F103C8T6 ARM STM32 Minimum System Development Board Module For Arduino Features: 100% Brand new and high quality! STM32F103C8T6 ARM STM32 Minimum System Development Board Module For Arduino Specifications: Model: STM32F103C8T6. Core: ARM 32 Cortex-M3 CPU. 72MHz work frequency. 64K flash memory, 20K SRAM. 2.0-3.6V power, I/O. Reset(POR/PDR). 4-16MHz crystal. Size: 5.3cm x 2.2cm Color: Blue Package includes: 1 x STM32F103C8T6 ARM STM32 Minimum System Development Board Module For Arduino

    • Color: Blue
    • Brand: HiLetgo
    • ASIN: B01DLIJOAO

  • RobotDyn - Pro Mini ATmega328 (5V, 16MHz), + A6-A7 pins - Enhanced version, Compatible for Arduino Pro Mini.

    Pinheaders NOT SOLDERED Pro Mini is based of the ATmega328 (AVR) microcontroller. Has 14 digital Inputs / Outputs (6 from which can be used as PWM outputs), 8 analog Inputs. Reset button. Mounting receptacles are included in the package but aren't soldered. For connection Pro Mini to the computer, it is necessary to use the USB-UART adapter, which you can find on our site. Or for updating of a firmware via the ISP interface (the programmer is required). Unregulated power is applied to RAW, with 4-9V (for 3.3V) and 6-9V (for 5V), and a peak of 12V. The power supply regulator will reduce it to logic level. (Please note that the higher the input voltage the higher after current stabilizer. Operating current up to 350mA. Product official page: http://robotdyn.com/catalog/boards/promini_atmega328p_compatible_with_arduino_mini/ * For get a detail information of product, instruction, schematic diagram, dimension diagram, guide and software, Pls visit to official page of product. RobotDyn(R) - registered trademark in USA. Zhuhai RobotDyn Technology Co.,Ltd - Developer and manufacture.

    • Color: 1 PC - Pro Mini ATmega328 (5V, 16MHz)
    • Brand: RobotDyn
    • ASIN: B071FMMBYX

  • SparkFun RedStick

    In 2015 we developed the BadgerStick as a fun and interactive way for people to learn about soldering and engage with SparkFun products at the multiple trade shows we appeared at. In 2016 we have refined the BadgerStick into what you see here, the SparkFun RedStick! The RedStick combines some of our favorite features like the Uno's Optiboot bootloader, the FTDI, small size, and the ability to plug directly into a computer's USB port (no FTDI board or USB cable required). The RedStick can be programmed by just plugging the board into your computer using the Arduino IDE: Just plug in the board, select "Arduino UNO" from the board menu and you're ready to upload code. The RedStick also has the hardware features you are used to: 14 Digital I/O pins with 6 PWM pins, 8 Analog Inputs, UART, SPI, I2C and external interrupts. This is all in a tiny package that can be plugged directly into your computer. You can power the SparkFun RedStick over the USB plug or through the power input (which supports a JST connector for a single celled Lipo). The onboard boost circuit can regulate anything from 2-6V. While the board does not have a battery charger, it can be powered over a single celled Lipo or even 2 AA batteries. Check out or related products for batteries and battery cases.

    • Brand: SparkFun
    • ASIN: B01BI8OK9E
    • UPC: 717520028178

  • MonkeyJack Gold Tone Aluminum 12V 16MHz Vehicle Car FM Radio Convertor Transmitter

    Description: - Product Name : Car FM Converter - Fit Car Voltage: 12V DC - Frequency: 16MHz - To transmit MP3 music by FM frequency to car stereo audio system. - Firstly please to adjust this product's frequency and car radio frequency at the same level.Specification: - Main Color: Blue - Material: Aluminum+Plastic - Size: Approx 62*25*25mm - Cable Length: Approx 160mmPackage Includes:1 Piece Car FM ConverterNote:Please allow 0.5-1 inch difference due to manual measurement.(1 inch=2.54cm)Please check the size measurement and the picture carefully before making payment.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Please understand,Thank you.

    • Brand: MonkeyJack
    • ASIN: B074BDNDNL
    • UPC: 019985810290