• Traxxas 6747 11-T Machined Steel Pinion Gear, 32P

    Gear, 11-T pinion (32-pitch) (machined steel) / set screw. Optional Traxxas pinion gears allow you to increase or decrease the final drive ratio and tune for different applications. Larger gears will result in higher speeds while smaller gears provide more torque. These are designed for use with 32-pitch spur gears and 3mm motor shafts. Use Traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. This product is made from high quality materials and designed for long-lasting performance. This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings.

    • Brand: Traxxas
    • ASIN: B004EDCYVC
    • UPC: 783329551124

  • Hot Racing NSG3211 11t Steel 32p Pinion Gear 5mm Bore

    Hot Racing hardened steel 11 tooth, 32 pitch pinion gear for motors with a 5mm shaftFEATURES: - CNC machined- Hardened steel to increased wear resistance and improve fatigue life- Nitrided to enhanced hardness corrosion resistanceYOU WILL RECEIVE: - One (1) pinion gear - One (1) M4x4mm setscrewREQUIREMENTS: - 2mm hex wrench to install setscrew- Removable thread lock (ex. blue Loctite) for setscrew- Motor with 5mm shaft- 32 pitch spur gearSPECIFICATIONS: - Tooth count: 11- Tooth pitch: 32 pitch - Tooth face width: 7mm- length: 14.5mm- For shaft: 5mmdescription revised by: SN September 19, 2016

    • Brand: Hot Racing
    • ASIN: B00A29C2N2
    • UPC: 083745587425

  • RCRunning 11T 12T 13T 14T 15T (M1) 5mm Shaft Motor Gear Module Pinion Combo Hardening for Brushless/Brushed Motor of 1:8 1/8 RC Monster Buggy Truck by

    Specifications:M1Teeth:11T 12T 13T 14T 15TTip diameter11T:12.85MM12T:13.60MM13T:14.85MM14T:16MM15T:17MMSuitable shaft diameter: 5mmMaterial:SteelPackage Including1 *11T Pinion Motor Gear1 *12T Pinion Motor Gear1 *13T Pinion Motor Gear1 *14T Pinion Motor Gear1 *15T Pinion Motor Gear

    • Color: Black
    • Brand: RCRunning
    • ASIN: B0728PHQCN
    • UPC: 190033700968

  • Hardened 32P Absolute Pinion, 11T

    OverviewExtra-hard 32 pitch pinions are a must for use with our steel spur gears and will last and last with plastic spur gears. Pinion is stamped with tooth number. 1/8 inch bore. One 5-40 set screw included. 1/16 inch allen wrench (not included) fits the 5/40 set screw.

    • Brand: Robinson Racing
    • ASIN: B0046EPB50
    • UPC: 719696017116

  • Axial AX30722 32P 11T Pinion Gear, Steel Motor Shaft, 3mm

    This is the 32 Pitch 11 Tooth Steel Pinion Gear From Axial Racing. FEATURES: Steel construction Works with 3mm motor shafts.

    • Brand: AXIAL
    • ASIN: B0083VT7PC
    • UPC: 787793360572

  • Redcat Racing M1.0 Pinion Gear for 5mm Shaft 11T

    Redcat Racing M1.0 Pinion Gear for 5mm Shaft 11T. Part is compatible with TR-MT8E-BE6S. Affordable, quality replacement parts.

    • Brand: Team Redcat
    • ASIN: B01M1NAQ23
    • UPC: 611901528656

  • Team Associated 91162 Bore 32P 11T Pinion Gear, 5mm

    Pinion Gear 11T - SC10 4x4 32P (5mm Shaft)

    • Brand: Team Associated
    • ASIN: B0051W7SJI
    • UPC: 787793296925

  • Robinson Racing Products 0110 Pinion Gear 32P, 11T

    Overview32 pitch alloy pinions are not heat treated and should only be used with plastic spur gears. If you only run plastic spur gears these pinions are the perfect choice. 32 pitch Alloy Pinions are not stamped with tooth number. 1/8 inch bore. One 5-40 set screw included. 1/16 inch allen wrench (not included) fits the 5/40 set screw.

    • Brand: Robinson Racing Products
    • ASIN: B0006O7TBS
    • UPC: 719696001108

  • Hot Racing Short 32P Steel Pinion Gear 11T CSG32X11

    Hot Racing brush-less black steel 32 pitch 11 tooth pinion gear. FEATURES: standard 4140 steel and heat treat heavy duty 4mm set screw for brush-less powerYOU WILL RECEIVE: one 32 pitch 11 tooth pinion gear with 4mm set screwSPECIFICATIONS: inner diameter: 1/8" (3.175mm)length 10.50 MMTooth width 5 mm

    • Brand: Hot Racing
    • ASIN: B01MSVTK79
    • UPC: 083745995091